Hampton Direct H25-NG1, H25-LP1 Installation, Logs must be oriented as shown below, D A B C

INSTALLATION

6)Take the embers and place on the burner in the space between the 2 front logs. Do not put embers on the burner in the area between the front logs and the rear log. See photo below.

A)

B)

C)

7)Place the center cross log on the locating pin in the top of the rear log and position as shown below.

Logs must be oriented as shown below.

D)

A)

B)

C)

8)Test fi re to ensure proper light off (make sure fl ame fl ows smoothly from one end of burner to the other). If there is any fl ame hesitation, check that area for any blockage of the burner ports.

9)Re-install the Glass Front and Cast Top.

	A)
B)	D)
	C)

32 Hampton® H25-1 Direct Vent Freestanding Gas Stove