Harbor Freight Tools 55525 manual

10.Prevent accidental fires. Remove any combustible material from the work area.

•When possible, move the work to a location well away from combustible materials. If relocation is not possible, protect the combustibles with a

cover made of fire resistant material.

•Remove or make safe all combustible materials for a radius of 35 feet (10 meters) around the work area. Use a fire resistant material to cover or block all open doorways, windows, cracks, and other openings.

•Enclose the work area with portable fire resistant screens. Protect combustible walls, ceilings, floors, etc., from sparks and heat with fire resistant covers.

•If working on a metal wall, ceiling, etc., prevent ignition of combustibles on the other side by moving the combustibles to a safe location. If relocation of combus- tibles is not possible, designate someone to serve as a fire watch, equipped with a fire extinguisher, during the cutting process and for at least one half hour after the cutting is completed.

•Do not weld or cut on materials having a combustible coating or combustible in- ternal structure, as in walls or ceilings, without an approved method for eliminating the hazard.

•Do not dispose of hot slag in containers holding combustible materials. Keep a fire extinguisher nearby and know how to use it.

•After spot welding, make a thorough examination for evidence of fire. Be aware that easily-visible smoke or flame may not be present for some time after the fire has started. Do not weld or cut in atmospheres containing dangerously reactive or flammable gases, vapors, liquids, and dust. Provide adequate ventilation in work areas to prevent accumulation of flammable gases, vapors, and dust. Do not apply heat to a container that has held an unknown substance or a combustible material whose contents, when heated, can produce flammable or explosive va- pors. Clean and purge containers before applying heat. Vent closed containers, including castings, before preheating, welding, or cutting.

11.Avoid overexposure to fumes and gases. Always keep your head out of the fumes. Do not breathe the fumes. Use enough ventilation or exhaust, or both, to keep fumes and gases from your breathing zone and general area.

•Where ventilation is questionable, have a qualified technician take an air sam- pling to determine the need for corrective measures. Use mechanical ventilation to improve air quality. If engineering controls are not feasible, use an approved respirator.

•Work in a confined area only if it is well ventilated, or while wearing an air-sup- plied respirator.

•Follow OSHA guidelines for Permissible Exposure Limits (PEL’s) for various fumes and gases.

SKU 55525	For technical questions, please call 1-800-444-3353;	Page
	Troubleshooting section at end of manual.