Harman-Kardon AVR65 manual Important Safety Information

Safety Information

2

Important Safety Information

Verify Line Voltage Before Use

Your AVR65 has been designed for use with 120-volt AC current. Connection to a line voltage other than that for which it is intended can create a safety and fire hazard and may damage the unit.

If you have any questions about the volt- age requirements for your specific model, or about the line voltage in your area, contact your selling dealer before plug- ging the unit into a wall outlet.

Do Not Use Extension Cords

To avoid safety hazards, use only the power cord attached to your unit. We do not recommend that extension cords be used with this product. As with all electri- cal devices, do not run power cords under rugs or carpets or place heavy objects on them. Damaged power cords should be replaced immediately with cords meeting factory specifications.

Handle the AC Power Cord Gently When disconnecting the power cord from an AC outlet, always pull the plug, never

CATV or Antenna Grounding

If an outside antenna or cable system is connected to this product, be certain that it is grounded so as to provide some pro- tection against voltage surges and static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mast and sup- porting structure, grounding of the lead- in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements of the grounding electrode.

NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV (Cable TV) system installer’s atten- tion to article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the ground- ing system of the building, as close to the point of cable entry as possible.

Installation Location

■To assure proper operation, and to avoid the potential for safety hazards, place the unit on a firm and level sur- face. When placing the unit on a shelf, be certain that the shelf and any mounting hardware can support the weight of the product.

■Make certain that proper space is pro- vided both above and below the unit for ventilation. If this product will be installed in a cabinet or other enclosed area, make certain that there is suffi- cient air movement within the cabinet. Under some circumstances a fan may be required.

■Do not place the unit directly on a carpeted surface.

■Avoid installation in extremely hot or cold locations, or an area that is exposed to direct sunlight or heating equipment.

■Avoid moist or humid locations.

■Do not obstruct the ventilation slots on the top of the unit, or place objects directly over them.

pull the cord. If you do not intend to use the unit for any considerable length of time, disconnect the plug from the AC outlet.

Do Not Open The Cabinet

There are no user-serviceable compo- nents inside this product. Opening the cabinet may present a shock hazard, and any modification to the product will void your guarantee. If water or any metal object such as a paper clip, wire or a staple accidentally falls inside the unit, disconnect it from the AC power source immediately, and consult an authorized service station.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead	The exclamation point within an
symbol, within an equilateral triangle, is	equilateral triangle is intended to
intended to alert the user to the	alert the user to the presence of
presence of uninsulated “dangerous voltage”	important operating and maintenance
within the product’s enclosure that may be of	(servicing) instructions in the literature
sufficient magnitude to constitute a risk of	accompanying the appliance.
electric shock to persons.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND.

AVR65 120 volt Rev (C) 10/6/98