Harman-Kardon AVR 147 owner manual Main Remote Control Functions

Main Remote Control Functions

Memory Button: Press this button to enter a radio station into the AVR ’s preset memory. Two underline indicators will flash at the right side of the Main Information Display Ò, you then have five seconds to enter a preset memory location using the Numeric Keys H. (See page 41 for more information).

Delay/Prev Ch.: Press this button to begin the process for setting the delay times used by the AVR when processing surround sound. After pressing this button, the delay times are entered by pressing the Set button F and then using the ⁄/¤ buttons D to change the setting. Press the Set button again to complete the process. (See page 26 for more information).

›Button: Press this button to change a setting or selection when configuring many of the AVR’s settings.

Speaker Select: Press this button to begin the process of configuring the AVR’s Bass Management System for use with the type of speakers used in your system. Once the button has been pressed, use the ⁄/¤ buttons D to select the channel you wish to set up.

Press the Set Button F and then select the speaker type (Large, Small or None) appropriate with the speaker in use. (See page 24 for more information).

Mute: Press this button to momentarily silence the AVR or TV set being controlled, depending on which device has been selected. When the AVR remote is being programmed to operate another device, this button is pressed with the Input Selector button 4 to begin the programming process. (See page 43 for more information on programming the remote).

Volume Up/Down: Press these buttons to raise or lower the system volume.

Digital Media Player (DMP) Selector: When Harman Kardon’s

(optional) is connected to Digital Media Player (DMP) Connector ￿ and a

compatible Apple® iPod® is docked in , pressing this selector will select the iPod as the audio source input device for the AVR 147. In addition, if a video display is connected to one of the Video Monitor Outputs ￿, the iPod’s messages will appear on screen, and in the Upper and Lower Display Lines Ò. The ⁄/¤/‹ / › Buttons DE , the Set Button F and the Transport Controls P may be used to navigate the iPod and to operate many functions. See page 37, and the manuals for The Bridge and your iPod for more information.

TV/Video Button: This button does not have a direct function on the AVR, but when used with a compatibly programmed VCR, DVD or satellite receiver that has a “TV/Video” function, pressing this button will switch between the output of the player or receiver and the external video input to that player. Consult the Owner’s Manual for your specific player or receiver for the details of how it implements this function.

NOTE: With the press of any remote button the Input Selector button 45 associated with the botton pressed will briefly flash red to confirm the transmission of the command, as long as there is a function for that button with the device selected (see function list on pages 46-47).

Dim Button: Press this button to activate the Dimmer function, which reduces the brightness of the front-panel display, or turns it off entirely. The first press of the button shows the default state. Press the button again to change the display to reduce the brightness by 50%, and press it again within five seconds and the main display will go completely dark. Note that this setting is temporary; regardless of any changes, the display will always return to full brightness when the AVR is turned on. The blue illumination around the Power Indicator 3 will always remain at full brightness regardless of the setting to remind you that the AVR is still turned on.

12MAIN REMOTE CONTROL FUNCTIONS