Harman-Kardon AVR 645 Zone II Remote Control Functions, A E B C J F I H G J, K J D
Q P O N M L

Zone II Remote Control Functions

The Zone II remote may be used in either the same room where the AVR is located, or it may be used in a separate room with an optional infrared sensor that is connected to the AVR’s Multi IR input jack .

A

E

B

C

J

F

I

H

G

J

APower Off B AVR Selector

C AM/FM Tuner Select D Input Selectors E OSD Button

F Navigation Controls G Numeric Keys H Disc Skip

I Volume Up/Down J Blank Buttons K Mute

L Clear Button M Direct Button

K

J

D

Q

P

O

N

M

L

NMemory Button O Tuner Mode Button P Transport Controls Q Set Button

The Bridge /DMP Selector

NOTE: The Zone II remote may be used in either the same room where the AVR is located, or it may be used in a separate room with an optional infrared sensor that is connected to the AVR’s Multi IR input jack f. When it is used in the same room as the AVR, it will control the functions of the AVR or any compatible Harman Kardon

We strongly recommend that the ZR 10 remote be used for the initial configuration and setup process for the AVR 645.

APower Off: When used in the room where the AVR is located, press this button to place the unit in Standby. When it is used in a remote room with a sensor that is connected to the Multi IR

jack , this button turns the Multi-Room system off.

BAVR Selector: Press this button to turn on the AVR. The input in use when the unit was last on will be selected.

CAM/FM Tuner Select: Press this button to select the Tuner as the input to the Multiroom system. Press it again to change between the AM and FM bands.

DInput Selectors: When the AVR is off, press one of these buttons to turn the unit on and to select a specific input. When the unit is already in use, pressing one of these buttons will change the input.

EOSD Button: Press this button to activate the On Screen Display (OSD) system used to set up or adjust the AVR’s parameters.

FNavigation Controls: Depending on the menu or function in use, pressing these buttons will navigate through menus, scroll through option lists or configuration choices, or move the cursor position. Press the left, right, up or down button, as appropriate to the adjustment being made.

products in that room. When it is used in a sepa- rate room via a sensor connected to the Multi IR Jack f, the buttons for power, input source, vol- ume and mute will control the source and volume for the second zone, as connected to the Multi Out Jacks •. (See page 49 for complete information on using the Multiroom system.)

14ZONE II REMOTE CONTROL FUNCTIONS