Installation and Connections

•It is not possible to feed an analog composite or S-video signal to a recorder or the AVR’s multizone system when an HDMI input is in use. If an HDMI-equipped source also has analog audio and video outputs, connect them

to the Video 2 or Video 3 Video

and

Audio

on the AVR.

 

•In some instances, HDMI-equipped sources will not permit more than one video output at a time, and thus you cannot use the same source in the main listening room and with the recorder or remote zone at the same time. This is not a fault of the AVR, but rather a function of the content protection systems that are part of the HDMI standard.

HDMI Output Connections

Connect the HDMI Output to an HDMI input on your video display. Thanks to the AVR 645’s video processing system, all video input signals are converted to an HDMI output, so only one connection is required between the AVR and your display.

SCART A/V Connections

For the connections described above your video device needs RCA (cinch) connectors or/and S-Video connectors for all Audio and Video signals: Any normal video device (Not SVHS or High 8) for only playback needs 3 RCA jacks, VCRs for record and playback even 6 RCA jacks. Any S-Video device (SVHS, High 8) needs 2 RCA (Audio) and 1 S-Video jack (Video), if it´s a playback unit, or 4 RCA (Audio In/Out) and

2 S-Video (Video In/Out) jacks, if it´s a recording VCR.

Many european video devices are equipped with RCA (Cinch) or S-Video jacks only partially, not for all audio and video in/outputs needed as described above, but with a so called Scart or Euro-AV connector (almost rectangular jack with 21 pins, see drawings on next page).

In that case the following Scart to Cinch adapters or cables are needed:

•Units for playback, such as satellite receivers, camcorders, DVD or LD players, need an adapter from Scart to 3 RCA plugs, see fig. 1 (normal video devices) or from Scart to 2 RCA+1 S-Video plugs, see fig. 4 (S-Video devices).

•HiFi VCRs need an adapter from Scart to 6 RCA plugs, see fig. 2 (normal video), or from Scart to 4 Audio+2S-Video jacks, see fig. 5 (S-Video VCR). Read carefully the instruction attached to the adapter to find which of the six plugs is used for the record signal to the VCR (connect with the AVR´s Out jacks) and for the playback signal from the VCR (connect with the AVR´s In jacks). Do not misconnect Audio and Video signals. Don´t hesitate to consult your dealer, if you are uncertain.

•If you use only normal video devices the TV monitor needs an adapter from 3 RCA plugs to Scart (fig. 3) only. If also S-Video devices are used an adapter from 2 RCA+1S-Video plugs to Scart is needed additionally (fig. 6), connect- ed to the SCART input on your TV that is pro- vided for S-Video.

Note that only the video plugs (the "yellow" cinch plug in fig. 3 and the S-Video plug in fig. 6) must be connected to the TV Monitor Output , and the volume on the TV must be reduced to minimum.

Important Note for Adapter Cables:

If the cinch connectors of the adapter you’ll use are labeled, connect the Audio and Video ”In” plugs with the corresponding Audio and Video ”In” jacks on the AVR (and with a VCR connect the ”Out” plugs to the ”Out” jacks on the AVR). Note that with some adapter types it may be just turned around: If no signal is audible/ visible when the VCR is playing connect the “Out” plugs to the ”In” jacks on the AVR and turned around. If the adapter plugs are not labeled in that way, pay attention to the signal flow directions as shown in the diagrams above and in the instruc- tion attached to the adapter. If uncertain, don’t hesitate to consult your dealer.

18INSTALLATION AND CONNECTIONS

Page 17 Page 19
Page 18
Image 18
Harman-Kardon AVR 645 owner manual Hdmi Output Connections, Scart A/V Connections, To the Video 2 or Video 3 Video Audio
Page 17 Page 19

AVR 645 specifications

The Harman-Kardon AVR 645 is a standout receiver that appeals to audiophiles and home theater enthusiasts alike. This model is known for its rich sound quality, extensive features, and user-friendly interface, making it a solid choice for anyone looking to enhance their home entertainment experience.

At the heart of the AVR 645 is its robust amplification system. With a power output of 55 watts per channel at 8 ohms, the receiver provides ample power to drive a variety of speakers. The incorporation of Harman-Kardon's patented Logic 7 processing technology allows for an immersive surround sound experience, creating a sense of depth and realism in audio playback. This feature is particularly beneficial for film and gaming, as it helps to create a multidimensional soundstage that pulls viewers into the action.

The AVR 645 supports a variety of audio formats, including Dolby Digital, DTS, and Pro Logic II, ensuring compatibility with a wide range of media. The receiver is equipped with multiple audio inputs and outputs, including HDMI, optical, and coaxial connections, allowing users to easily connect their DVD players, gaming consoles, and other devices. Additionally, it features a built-in AM/FM tuner for those who enjoy traditional radio.

In terms of video capabilities, the AVR 645 is highly versatile, supporting both standard and high-definition video formats. The receiver includes multiple HDMI inputs, facilitating easy switching between different high-definition sources without compromising video quality. The ability to upconvert lower resolution video to near-HD quality further enhances the viewing experience, making it a great choice for those with diverse video content.

User-friendliness is another highlight of the AVR 645. The intuitive on-screen user interface makes it easy to navigate settings and setup configurations. The Zone II feature allows for audio playback in another room, expanding the potential for whole-home audio solutions.

Ultimately, with its blend of power, quality, and versatility, the Harman-Kardon AVR 645 remains a respected choice among home theater systems, ensuring an elevated audio and visual experience for all users.
Top Page Image Contents