REAR-PANEL CONNECTIONS

Remote Infrared (IR) Input and Output: When the Remote IR sensor on the front panel is blocked, such as when the DVD 38 is placed inside a cabinet, connect the IR Output of your receiver/processor or an optional IR receiver to the Remote IR Input jack for use with the remote control. The Remote IR Output may be connected to the Remote IR Input of a compatible source device (or other product) to enable remote control through the DVD 38. When several devices are used, connect them in “daisy chain” fashion.

HDMI Output: If you have an HDMI-compatible receiver or video display device, connect this output to an HDMI input on the receiver or video display for high-quality digital audio and video. Even if your receiver is not capable of processing audio in the HDMI format, you will still experience the superb reproduction of HDMI video.

In all cases, the video display must be HDCP-compliant in order to use the HDMI output. For best results, we do not recommend HDMI connec- tions in excess of ten feet without a repeater. If your video display has a DVI input, you may use an optional HDMI-to-DVI cable or adapter for the connection to the display.

The DVD 38 is Simplay HD-verified for compatibility via the HDMI connection with other Simplay HD-verified products.

The following audio formats may be output via the HDMI connection: Audio CD – 2-Channel PCM or 5.1-channel DTS

DVD-Audio2-Channel PCM

DVD-Video – Up to 5.1-channel Dolby Digital or DTS

NOTE: To hear the high-resolution surround sound recorded on DVD- Audio discs, you also need to connect the 6-Channel Audio Outputs to the corresponding input jacks on your receiver or processor. These formats are not output digitally.

To hear a two-channel analog downmix via the 2-Channel Analog Audio Outputs, select Stereo at the Bass Management setting in the AUDIO SETUP submenu, or press the Audio Mode Button on the remote repeatedly until the Stereo setting is selected.

Coaxial and Optical Digital Audio Outputs: If your receiver or processor has an available digital audio input, connect either of these digital audio outputs to the corresponding input on the receiver/processor to enjoy digital audio formats such as Dolby Digital, DTS or standard PCM (traditionally found on CDs and may be available on other discs). Never connect both of these outputs to the same device simultaneously. However, it is okay to connect one of the digital audio outputs plus the analog audio outputs to the same device.

NOTE: The Coaxial Digital Output should only be connected to a digital input. Even though it is the same RCA-type connector as standard analog audio connections, DO NOT connect it to a conventional analog input jack.

Component Video Outputs: If your television or video display and receiver are component video-capable, and your display does not have an HDMI input, connect these jacks to the corresponding inputs on the receiver or TV that are labeled “Y/Pr/Pb” or “Y/Cr/Cb.” If your video display is capable of handling resolutions of 480p or better, connect these outputs to the HD (high-definition) component video inputs on your display. If the display is capable of displaying progressive-scan

video, select Progressive at the Scan Type setting in the VIDEO SETUP submenu, or press the P/I Button on the remote repeatedly until the Progressive Scan setting is selected.

IMPORTANT NOTE: Do not connect the Component Video Output jacks to standard composite video inputs on any device.

Composite and S-Video Outputs: If your video display does not have HDMI or component video inputs, connect one of these two video outputs to your receiver/processor or directly to the display. If available, S-video is preferred. Do not connect more than one of the DVD 38’s analog video outputs (component video, S-video, composite video) to any other device at the same time. You may connect both the HDMI Output and the Composite Video Output to your receiver if your receiver distributes composite video through a multiroom system.

2-Channel Analog Audio Outputs: Connect these outputs to the left and right analog audio inputs on your receiver/processor or TV. You may connect these jacks in addition to a digital audio connection, and it is recommended that you do so as a backup if you wish to use the DVD 38 as a source device for a multiroom system or if you wish to make analog recordings, as it is not possible to make digital recordings of most DVDs.

6-Channel Analog Audio Outputs: Connect these outputs to the matching 6-channel analog audio inputs on your receiver or surround sound processor. This connection is required to listen to the multichannel tracks on DVD-Audio discs. If the disc also contains a Linear PCM, Dolby Digital or DTS track, you may listen to it using the HDMI Output, the Coaxial or Optical Digital Audio Output or the 2-Channel Analog Audio Outputs.

AC Power Cord: Connect the AC power cord to an AC outlet. If the outlet is controlled by a switch, make certain that it is in the ON position. If the cord somehow becomes damaged, contact your authorized Harman Kardon dealer for a replacement.

11

Page 11
Image 11
Harman-Kardon DVD 38 manual REAR-PANEL Connections