HOW TO USE THE SETTINGS MODE
The console features a settings mode that allows you to connect the treadmill to your own wireless network and to log in to your iFit Live account. The settings mode also allows you to select the unit of measure- ment and to turn on and turn off the display demo mode. You may also be able to select a language.
1.Select the settings mode. Insert the key into the console (see step 1 on page 20). Next, select the main menu (see
step 2 on page 20). Then, touch the i button near the lower right cor-
ner of the screen to select the settings mode.
2.Select the wireless network mode.
If desired, touch the Wireless Network button on the screen. Note: It may take a few moments for the list of wireless networks to appear.
Note: You must have your own wireless network and an 802.11b/n router with SSID broadcast en- abled (hidden networks are not supported).
Make sure the WiFi checkbox near the upper right corner of the screen is marked with a green check- mark. If it is not, touch the checkbox once and wait for a few seconds. The console will search for available wireless networks.
When a list of networks appears, touch the desired network. Note: You will need to know your network name (SSID). If your network has a password, you will also need to know the password.
An information box will ask if you want to connect to the wireless network. Touch the Connect button to connect to the network or touch the Cancel but- ton to return to the list of networks. If the network has a password, touch the password entry box. A keyboard will appear on the screen. To view the password as you type it, touch the Show Password checkbox.
To use numbers or other characters on the key- board on the screen, touch the .?123 button. To view more characters, touch the Alt button. Touch the Alt button again to return to the number key- board. To return to the letter keyboard, touch the ABC button. To view capital characters, touch the button with an
When the console has connected to your wireless network, the WiFi box at the top of the screen will display the word CONNECTED. Then, touch the Home button on the console to return to the set- tings mode.
To disconnect from a wireless network, select the wireless network and touch the Forget button.
If you are having problems connecting to an en- crypted network, make sure your password is cor- rect. Note: Passwords are
Note: The iFit Live mode supports unsecured and secured (WEP, WPA, and WPA2) encryption. A broadband connection is recommended; perfor- mance depends on connection speed.
Note: If you have questions after following these instructions, go to www.iFit.com/support for assistance.
27
