Exhaust Hood
Your range is equipped with a two speed range hood that may be either vented directly to the outside, or may be installed ventless. A set of exhaust filters are included with your hood. The filters should be cleaned periodically in soapy water. Extras are available from your dealer or directly from Heartland Appliances Inc. Please order 4 or more filters at one time to save freight and handling charges. Phone your dealer for pricing and ordering instructions.
Ventless Installation
Your unit is already set up for ventless operation. Cooking fumes are drawn through the filters and exhausted through the rear of the hood, back into the room. Install the exhaust filters in their location under the cabinet by first removing the light lens. Then on one side, insert one of the filters into the grooves (front and rear of the cabinet) and slide into place. Repeat these steps for the second filter.
Figure 5 Exhaust venting options
Vented Installation, Tools, Material, and Dimensions
Tools required to install vented hood:
Hammer | Slot screwdriver |
Pliers | Electric drill |
Measuring tape | Drill bits |
Sabre saw OR Keyhole saw |
|
Materials Required:
Caulking to seal around duct Sheet metal screws
The above are standard parts and are available at any hardware store or heating contractor.
8
