2 Getting Started

A. Design and Installation Considerations

Heat & Glo direct vent gas appliances are designed to op- erate with all combustion air siphoned from outside of the building and all exhaust gases expelled to the outside. No additional outside air source is required.

CAUTION

Check building codes prior to installation.

•Installation MUST comply with local, regional, state and national codes and regulations.

•Consult local building, fire officials or authorities having jurisdiction about restrictions, installation inspection, and permits.

When planning an appliance installation, it’s necessary to determine the following information before installing:

•Where the appliance is to be installed.

•The vent system configuration to be used.

•Gas supply piping.

•Electrical wiring.

•Framing and finishing details.

•Whether optional accessories—devices such as a fan, wall switch, or remote control—are desired.

C.Inspect Appliance and Components

WARNING

Inspect appliance and components for damage. Damaged parts may impair safe operation.

• Do NOT install damaged components.

•Do NOT install incomplete components.

•Do NOT install substitute components.

Report damaged parts to dealer.

•Carefully remove the appliance and components from the packaging.

•The vent system components and trim doors are shipped in separate packages.

•The gas logs may be packaged separately and must be field installed.

•Report to your dealer any parts damaged in shipment, particularly the condition of the glass.

•Read all of the instructions before starting the in- stallation. Follow these instructions carefully dur- ing the installation to ensure maximum safety and benefit.

WARNING

 

WARNING

Keep appliance dry.

 

Hearth & Home Technologies disclaims

• Mold or rust may cause odors.

 

any responsibility for, and the warranty will

• Water may damage controls.

 

be voided by, the following actions:

 

 

• Installation and use of any damaged appliance or vent

B. Tools and Supplies Needed

 

system component.

•

Modification of the appliance or vent system.

Before beginning the installation be sure that the following

• Installation other than as instructed by Hearth & Home

tools and building supplies are available.

 

Technologies.

Reciprocating saw

Framing material

• Improper positioning of the gas logs or the glass door.

•

Installation and/or use of any component part not

Pliers

Hi temp caulking material

 

approved by Hearth & Home Technologies.

Hammer

Gloves

 

Any such action may cause a fire hazard.

Phillips screwdriver

Framing square

 

 

Flat blade screwdriver

Electric drill and bits (1/4 in.)

 

 

Plumb line

Safety glasses

 

 

Level

1/2 - 3/4 inch length, #6 or #8 Self-drilling screws

Manometer

Voltmeter

 

 

Tape measure

Noncorrosive leak check solution

 

 

One 1/4 inch female connection (for optional fan).

6

Heat & Glo • Cerona-36, Cerona-42 • 2106-900 Rev. A • 6/06

Page 5 Page 7
Page 6
Image 6
Heat & Glo LifeStyle CERONA-42 Getting Started, Design and Installation Considerations, Inspect Appliance and Components
Page 5 Page 7

CERONA-42, CERONA-36 specifications

The Heat & Glo LifeStyle CERONA-36 and CERONA-42 are elegant gas fireplaces designed to enhance the ambiance of any living space while providing effective heating solutions. These models stand out due to their sleek design and innovative technologies that cater to modern homeowners seeking both comfort and style.

One of the primary features of the CERONA series is their clean, contemporary aesthetic. The linear design maximizes the display of flames and minimizes visual distractions, making them a focal point in any room. With options for various finishes and customizable media, including glass and logs, homeowners can truly personalize their fireplace to match their décor.

The CERONA-36 and CERONA-42 are equipped with advanced burner technology that ensures an exceptional flame presentation. The high-efficiency burners not only produce beautiful flames but also optimize heat output while maintaining energy efficiency. These fireplaces are designed to provide warmth without sacrificing environmental consciousness, making them an ideal choice for eco-aware consumers.

Both models come with Heat & Glo's patented IntelliFire Technology, which allows for adaptive ignition and reliable operation. This technology ensures that the fireplace ignites quickly and safely, providing peace of mind for users. Additionally, the remote control feature allows for easy operation from anywhere in the room, enhancing convenience when it comes to controlling the temperature and ambiance.

The CERONA series also incorporates a unique Power Vent technology. This enables the fireplace to vent up to 40 feet horizontally and vertically, offering flexibility in installation and allowing for greater design possibilities for any space in the home.

Moreover, the fireplaces are designed with sound-dampening features that reduce operational noise, ensuring a peaceful ambiance while maximizing the visual experience of dancing flames.

The straightforward maintenance and cleaning requirements of the CERONA-36 and CERONA-42 further contribute to their appeal. With a user-friendly design, these fireplaces simplify upkeep, making them suitable for busy lifestyles.

In summary, the Heat & Glo LifeStyle CERONA-36 and CERONA-42 gas fireplaces are remarkable heating solutions that combine aesthetics, technology, and user convenience. Their modern design, efficient operation, and adaptable installation options make them a valuable addition to any contemporary home, ensuring both warmth and elegance for years to come.
Top Page Image Contents