8 Installing Vent Pipe

A. Assembly of Vent Sections

WARNING

Fire Risk

Exhaust Fumes Risk

Impaired Performance of Appliance

• Overlap pipe slip sections at least 1-1/2 inches.

•Use pilot holes for screws.

•Screws must not exceed one inch long.

•Pipe may separate if not properly joined.

Make sure that the fiberglass rope ring supplied in the manual bag seals between the first vent component and the outer appliance wrap (see Figure 8.1).

FIRST VENT

FIBERGLASS

COMPONENT

ROPE RING

 

OUTER

 

WRAP

 

Figure 8.1 Fiberglass Rope Ring

 

Figure 8.2 Lances

A

B

Figure 8.3

Figure 8.4

Attaching Vent to the Firebox

 

 

 

 

 

Note: Make sure the seams are not aligned to prevent unintentional disconnection.

Assembly

To attach the first pipe section to the

 

 

 

 

 

 

CORRECT

 

INCORRECT

 

collars, slide the male end of the inner

 

 

 

 

 

 

 

 

vent of the pipe section over the inner

 

 

 

 

 

collar on the firebox assembly. At the

 

 

 

 

 

same time, slide the outer flue over

 

 

 

 

 

the outer collar on the appliance. Push

 

 

 

 

 

the pipe section into the appliance

 

 

 

 

 

collar until all the lances (Figure 8.2)

 

 

 

 

 

have snapped in place. Tug slightly

 

 

 

 

 

on the section to confirm it has

 

 

 

 

 

completely locked into place. It is

 

Figure 8.5 Seams

 

 

acceptable to use screws no longer

 

 

 

 

 

 

 

 

 

 

than 1 inch to hold outer pipe sections together. If predrilling holes, do

make sure they have snapped together (see Fig-

NOT penetrate inner pipe.

ure 8.4) and the seams are not aligned (see Fig-

 

ure 8.5). Tug slightly on section A to confirm it has

Assembling Pipe Sections

completely locked into place.

Insert the inner flue of section A into the flared inner flue of section B.

For 90° and 45° elbows that are changing the vent

Start the outer flue of section A over the outer flue of section B (see

direction from horizontal to vertical, one screw

Figure 8.3). Note: The end of the pipe sections with the lances/tabs

minimum should be put in the outer flue at the

on it will face towards the appliance.

horizontal elbow joint to prevent the elbow from

 

Once both inner and outer flues are started, press section A onto

rotating. Use screws no longer than 1 inch. If

section B firmly until all lances have snapped into place. Check to

predrilling screw holes, do NOT penetrate inner pipe.

Heat & Glo • Cerona-36, Cerona-42 • 2106-900 Rev. A • 6/06

23

Page 22 Page 24
Page 23
Image 23
Heat & Glo LifeStyle CERONA-36 Installing Vent Pipe, Assembly of Vent Sections, Attaching Vent to the Firebox Assembly
Page 22 Page 24

CERONA-42, CERONA-36 specifications

The Heat & Glo LifeStyle CERONA-36 and CERONA-42 are elegant gas fireplaces designed to enhance the ambiance of any living space while providing effective heating solutions. These models stand out due to their sleek design and innovative technologies that cater to modern homeowners seeking both comfort and style.

One of the primary features of the CERONA series is their clean, contemporary aesthetic. The linear design maximizes the display of flames and minimizes visual distractions, making them a focal point in any room. With options for various finishes and customizable media, including glass and logs, homeowners can truly personalize their fireplace to match their décor.

The CERONA-36 and CERONA-42 are equipped with advanced burner technology that ensures an exceptional flame presentation. The high-efficiency burners not only produce beautiful flames but also optimize heat output while maintaining energy efficiency. These fireplaces are designed to provide warmth without sacrificing environmental consciousness, making them an ideal choice for eco-aware consumers.

Both models come with Heat & Glo's patented IntelliFire Technology, which allows for adaptive ignition and reliable operation. This technology ensures that the fireplace ignites quickly and safely, providing peace of mind for users. Additionally, the remote control feature allows for easy operation from anywhere in the room, enhancing convenience when it comes to controlling the temperature and ambiance.

The CERONA series also incorporates a unique Power Vent technology. This enables the fireplace to vent up to 40 feet horizontally and vertically, offering flexibility in installation and allowing for greater design possibilities for any space in the home.

Moreover, the fireplaces are designed with sound-dampening features that reduce operational noise, ensuring a peaceful ambiance while maximizing the visual experience of dancing flames.

The straightforward maintenance and cleaning requirements of the CERONA-36 and CERONA-42 further contribute to their appeal. With a user-friendly design, these fireplaces simplify upkeep, making them suitable for busy lifestyles.

In summary, the Heat & Glo LifeStyle CERONA-36 and CERONA-42 gas fireplaces are remarkable heating solutions that combine aesthetics, technology, and user convenience. Their modern design, efficient operation, and adaptable installation options make them a valuable addition to any contemporary home, ensuring both warmth and elegance for years to come.
Top Page Image Contents