■Bundle the piping and drain hose together by wrapping them with cloth tape over the range within which they fit into the rear piping housing
section.
Drain hose
Pipe
Vinyl tape(narrow)
Wrap with vinyl tape(wide)
Green / Yellow wire |
B |
HReroute the pipings and the drain hose across the back of the chassis.
Piping for 
passage through piping hole
IReinstall the parts to the original position.
■Refix the lower panel to the original position.
■The chassis bottom(A) should be connected to the steel chassis(B) with green/yellow wiring using two screws.
Green / Yellow wire |
A
■Connect display conductor.
Main PCB
■Refix the front right side panel to the original position with the two screws.
10
