Heat Controller HMC30AS-1, HMC30BS-1, HMH30AS-1 manual Do not install it yourself customer

Models: HMC30AS-1 HMH30BS-1SINGLE-ZONE HMH30AS-1 HMC30BS-1

1 23
Download 23 pages 57.06 Kb
Page 3
Image 3
Do not install it yourself (customer).

THE FOLLOWING SHOULD BE ALWAYS OBSERVED FOR SAFETY

Be sure to read "THE FOLLOWING SHOULD BE ALWAYS OBSERVED FOR SAFETY" before installing the air conditioner.

Be sure to observe the cautions specified here as they include important items related to safety.

The indications and meanings are as follows.

WARNING

CAUTION

:Could lead to death, serious injury, etc.

:Could lead to serious injury in particular environments when operated incorrectly.

After reading this instructions, be sure to keep it together with the owner's manual in a handy place on the customer's site.

Manual background WARNING

Do not install it yourself (customer).

Incorrect installation could cause injury due to fire, electric shock, the unit falling or leakage of water. Consult the dealer from whom you purchased the unit or special installer.

Install the unit securely in a place which can bear the weight of the unit.

When installed in an insufficiently strong place, the unit could fall causing injury.

Use the specified wires to connect the indoor and outdoor units securely and attach the wires firmly to the terminal board connecting sections so the stress of the wires is not applied to the sections.

Incorrect connection and fixing could cause fire.

Attach the electrical part cover to the indoor unit and the service panel to the outdoor unit securely.

If the electrical part cover of the indoor unit and/or the service panel of the outdoor unit are not attached securely, it could result in a fire or electric shock due to dust, water, etc.

Perform the installation securely referring to the installation instruction.

Incorrect installation could cause a personal injury due to fire, electric shock, the unit falling or leakage of water.

Perform electrical work according to the installation manual and be sure to use an exclusive circuit.

If the capacity of the power circuit is insufficient or there is incomplete electrical work, it could result in a fire or an electric shock.

Check that the refrigerant gas does not leak after installation is completed.

Be sure to use the part provided or specified parts for the installation work.

The use of defective parts could cause an injury due to a fire, electric shock, the unit falling, etc.

CAUTION

For maximum product life and efficiency this unit has been designed, in the heating mode, to lock-out at outdoor temperatures below 26-29degF.

At outdoor temperatures below 26-29degF. another means of heating the conditioned space must be provided.

Perform the drainage/piping work according to the installation instruction.

If there is a defect in the drainage/piping work, water could leak from the unit and household goods could get wet and be damaged.

Do not install the unit in a place where an inflammable gas leaks.

If gas leaks and accumulates in the area surrounding the unit, it could cause an explosion.

3

Page 3
Image 3
Heat Controller HMC30AS-1, HMC30BS-1, HMH30AS-1, HMH30BS-1SINGLE-ZONE manual Do not install it yourself customer