Heatiator C40 owner manual F. Tools and Supplies Needed, G. Fireplace System Requirements

F. Tools and Supplies Needed

Before beginning the installation be sure the following tools and building supplies are available:

Reciprocating saw	Framing material
Pliers	Non-combustible sealant
Hammer	Gloves
Phillips screwdriver	Framing square
Flat blade screwdriver	Electric drill and bits
Plumb line	Safety glasses
Level	Tape measure

1/2-3/4 in. length, #6 or #8 self-drilling screws Misc. screws and nails

G. Fireplace System Requirements

The Heatilator fireplace system consists of the following:

•Fireplace

•Firebrick

•Chimney termination cap

•Chimney system

•Hearth extension

•Outside air

Required components include:

•Chimney Air Kit (with SL 300 Series Pipe)

Optional components include:

•Firescreen

•Lintel Bar

•Heat Zone Kit

•Top Vent Kit

H. Inspect Fireplace and Components

Warning! Risk of Fire and/or Explosion! Damaged parts could impair safe operation. Do NOT install dam- aged, incomplete or substitute components. Keep fire- place dry.

•Remove fireplace and components from packaging and inspect for damage.

•Vent system components and doors are shipped in separate packages.

•Report to your dealer any parts damaged in shipment.

•Read all the instructions before starting the installation. Follow these instructions carefully during the installation to ensure maximum safety and benefit.

Page 34 Heatilator • Constitution EPA Fireplace • 480-1091H 4/12