Heatiator Log Set Assembly: LOGS-NDI35 Models: NDI35, NDI35-SP, 1, 2

33Heatilator • NDI30, NDI30-SP, NDI35, NDI35-SP, NDI30-SPFK, NDI35-SPFK • 2226-900 Rev. G • 4/11
G. Install the Log Assembly
Log Set Assembly: LOGS-NDI35
Models: NDI35, NDI35-SP
CAUTION: Logs are fragile, handle with care. Log #1 (SRV2224-701) Position Log #1 as shown in Figure 3. Note additional
references in Figure 2. Set the log on the log support. Ensure the log is pushed back so that the log touches the back of the
fi rebox. The log should be centered with the burner.
Figure 2.
LOG SUPPORT
Figure 3. Install Log #1
Figure 4. Log #2 Figure 5. Log #2
Log #2 (SRV2224-706): Position Log #2 as shown in Figure 4. Refer to Figure 2 and Figure 5 for additional details. Mate
the slot located on the bottom of Log #2 with the left log pin located on the burner top. Rotate the left end of Log #2 forward
until it comes into contact with the left grate tine.
GRATE TINES
LOG PINS
BASE TINE
LOG CONTACTS
LEFT GRATE TINE
LOG PIN
MATES WITH
LOG SLOT
2
SRV2224-701
SRV2224-704
SRV2224-703 SRV2224-702
SRV2224-706 SRV2224-705
SLOT
Figure 1. Log Set Installed
1