English
7. Stopper for precision cutting ... (Stopper is optional accessory)
WorkpieceStopper
Holder
The stopper facilitates continuous precision cutting in lengths of
To install the stopper, attach it to the holder with the 6mm knob bolt as shown in Fig. 13.
Move
6mm Knob Bolt
Fig. 13
8. Using an ink line
Guard Saw Blade Groove
(1)Right angle cutting
Loosen the 8mm knob bolt and contact the tip of the guard with the workpiece.
Aligning the ink line on the workpiece with the groove of the guard, the workpiece is cut on the ink line (Fig. 14).
Workpiece Marking 8mm
Move the
Guard
Backward
Fence (B)
Fig. 14 |
|
|
8mm Knob Bolt | (2) Miter cutting and compound cutting | |
| ||
|
| (Miter cutting + bevel cutting) |
Safety |
| Upon lowering the motor section, the safety cover is raised and |
Cover |
| the saw blade appears. |
|
| |
Guard |
| Align the ink line with the saw blade (Fig. 15). |
Marking |
| CAUTION: In some arrangements when the turntable is |
rotated, the guard projects from the fence sur- | ||
|
| |
face. Loosen the 8mm knob bolt and push the guard to the retracted position. Never lift the safety cover while the saw blade is rotating.
Fig. 15
PRACTICAL APPLICATIONS
WARNING: * To avoid personal injury, never remove or place a workpiece on the table while the tool is being operated.
*Never place your limbs inside of the line next to warning sign while the tool is being operated. This may cause hazardous conditions (see Fig. 16).
Line | Warning Sign | Warning Sign | Line |
Fig. 16
15
