Basic operations (continued)
Turning off the power]
1
2
P _n P | MUTE |
BLANK AUTO TIMER
1 Press the STANDBY/ON button for approximately 1 sec.
•The Power indicator wilt blink orange, then the lamp wilt turn off. Approximately 1 sec. after that, the lamp will light orange.
•After the power is turned off, the lamp will be cooled for approximately 1 min. and the power cannot
be turned off even by pressing the STANDBY/ON button.
•The standby status wilt not be entered if the time which the STANDBY/ON button is pressed is too short.
2
3
Turn off the main power switch of the projector [ _ : OFF].
Attach the lens cap.
Do not turn offthe main power switch while the lamp is on because this will shorten the service life of the lamp.
Plug & Play
This projector | is VESA DDC 1/2B | compatible. | Plug & play | is possible | by connecting | to a computer that is | ||||
VESA DDC (Display Data | Channel) | compatible. |
|
|
|
|
|
| ||
(Plug & play | is a system | configured | with | peripheral | equipment | including a computer and display, and an | ||||
operating system. |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| 7 |
[Caution') | Use the RGB cable included | with | this | projector | when | using | plug & play. | With other cables, pins ] | ||
| (12) - (15) are sometimes not connected (effective only for RGB). | J | ||||||||
|
| |||||||||
14
