Connecting the USB | Hitachi CPX960WE manual

Connecting the USB

1. Connect the projector and computer with a suitable commercially available cable.

2. Press the 1NPUT button of the projector or the RGB 1/2 button of the remote control and select the input / where the computer is to be connected.

3. Start the mouse function.

4. Refer to page 10, 26 concerning the remote control of mouse operations.

5. Varying the force with which the DISK PAD button is pressed varies the speed of mouse operation.

USB jack		Projector	Computer	USB jack
(B type)				(A type)
2	1	+5V(_1_	@+5V

-DATA@@-DATA

+DATA@@+DATA

1 2 3 4

3 4

GND@

@GND

USB cable

_Caution-) • Before making connections, read the instruction manual of the equipment to be connected.

•Use the optional USB cable to connect.

•Effective with USB only when the mouse is used.

•Do not use with any device other than a personal computer.

•When using with Windows 95, it is necessary to set so that USB can be used with version OSR 2.1 or higher. Depending on the kind or the virsion of the host controller, operation may not be possible in some cases.

•In the case of notebook type computers with a built-in pointing device such as a track ball, in some cases the built-in pointing device wilt have priority even if a mouse is connected and the mouse may not be selected.

In such case, disable the built-in pointing device and change the BIOS setting (system setup) so that an external mouse can be selected.

After changing the B1OS setting, perform the operations described in 1 - 3 above. Refer to the computer hardware manual concerning the BIOS setting.

Also, some computers may not have a utility program to operate a mouse. Refer to the computer hardware manual.

25

Image 25

Hitachi CPX960WE user manual Connecting the USB

Contents

Contents FeaturesOutline Page Before Use Avoid shock or impact on Do not install on an unstable surfaceProjector Do not allow the laser beam to enter Eyes Do not position the power Cord under the projector. This can When disconnecting Power plug, do not pull on the power Do not touch the power plug with wet hands because thisUse the caster brakes Do not place heavy objects on this Projector Moving the projector Names and functions of each part Checking the package Contents Audio OUT Names and functions of each part P button *2 Remote control transmitterVideo RGB Laser Battery Cover TCaution Battery usage cautions BatteryCover Typical LCD Projector and Screen Installation InstallationUsing the adjusters ToD view Side view To project Basic operations Plug & Play Turning off the powerPress the STANDBY/ON button for approximately 1 sec Basic operations Cancelling the Freeze functionFreeze Press the Freeze button Moving the display area Changing the magnification ratioReturning to normal display Returning to the initial settings Adjustments and functions Using the Setup Menu Adjustments and functionsAdjustment item Moves the image up and down System. When the screen is unstble no color Adjustment item Adjustment descriptionVideo Blank KeystoneStart UP COM. Speed TimerAuto OFF Sync on Connection to the RGB signal terminal Connection to the video signal terminalsInput signals Signal Input jacks Example of computer signal Connectiontothe RGBsignalterminalResolution Signal mode Display Mode Horizontal signal timing Computer/Signal Timing Initial set signalsVertical signal timimg lines Connecting the USB Mouse functions Connection to the control signal terminalMouse Mouse cable Product name Model Serial mouse Signal JackMouse 610 RS232C communication Systemvideo Command Data ChartSize Color Balance R Requesting projector status When data sent by the projector cannot be understood Cleaning the Air filter Example of system setupFilterModel Screen displays Lamp Indicators When you think something wrongSymptom Possible cause Message table Control Dimensional Diagram About the warranty About the warranty and after-serviceAbout after-service About repairs during the warranty period