Changing the magnification ratio | Hitachi CPX960WE instruction

Basic operations (continued)

I Magnify function

Part of an image can be displayed magnified.

m4

S_

(refer to page 10)

5

j6

p _n p

MUTE

BL_NK AUTO TIMER

1Press the MAGNIFY + button.

•The center part of the image wilt be displayed magnified approximately two times.

Changing the magnification ratio ]

Press the MAGNIFY + button.

• When this button is pressed, the image wilt be displayed even larger.

3Press the MAGNIFY- button.

• When this button is pressed, the image wilt be displayed even smaller.

Moving the display area

4 Press the POSITION button.

5Press the DISK PAD up, down, left and right buttons.

• The magnified area will move in accordance with the button pressed.

Returning to normal display I

6 Press the MAGNIFY OFF button.

_-Caution_• When there is no video signal input, Magnify is not effective when the video signal input is outside the sync range.

•The magnify function will be cancelled when the input select button is pressed or the display mode of the PC being used for display is changed.

•The Magnify function will be cancelled after the operations such as "menu display

ON","FOCUS", "FREEZE", "P inP", "AUTO", "VOLUME/_ _/", "MUTE", and "POSITION".

16

Image 16

Hitachi CPX960WE user manual Changing the magnification ratio, Moving the display area, Returning to normal display

Contents

Contents FeaturesOutline Page Before Use Avoid shock or impact on Do not install on an unstable surfaceProjector Do not position the power Cord under the projector. This can Do not allow the laser beam to enter Eyes Do not touch the power plug with wet hands because this When disconnecting Power plug, do not pull on the powerUse the caster brakes Do not place heavy objects on this Projector Moving the projector Checking the package Contents Names and functions of each part Names and functions of each part Audio OUT Remote control transmitter P button *2Video RGB Laser Battery Cover TCaution Battery usage cautions BatteryCover Installation Typical LCD Projector and Screen InstallationUsing the adjusters ToD view Side view Basic operations To project Plug & Play Turning off the powerPress the STANDBY/ON button for approximately 1 sec Cancelling the Freeze function Basic operationsFreeze Press the Freeze button Moving the display area Changing the magnification ratioReturning to normal display Adjustments and functions Returning to the initial settings Adjustments and functions Using the Setup MenuAdjustment item Moves the image up and down System. When the screen is unstble no color Adjustment item Adjustment descriptionVideo Blank KeystoneStart UP Timer COM. SpeedAuto OFF Sync on Connection to the video signal terminals Connection to the RGB signal terminalInput signals Signal Input jacks Connectiontothe RGBsignalterminal Example of computer signalResolution Signal mode Display Mode Horizontal signal timing Computer/Signal Timing Initial set signalsVertical signal timimg lines Connecting the USB Connection to the control signal terminal Mouse functionsMouse Mouse cable Product name Model Serial mouse Signal JackMouse RS232C communication 610 Command Data Chart SystemvideoSize Color Balance R When data sent by the projector cannot be understood Requesting projector status Cleaning the Air filter Example of system setupFilterModel Lamp Screen displays When you think something wrong IndicatorsSymptom Possible cause Message table Dimensional Diagram Control About the warranty and after-service About the warrantyAbout after-service About repairs during the warranty period