Hitachi CPX960WE Connection to the video signal terminals, Connection to the RGB signal terminal

Connection to the video signal terminals

1. Input signals

	Brightness signal	1.0V p-p, 75	£2terminator
S-VIDEO signal		0.286V p-p(burst signal), 75 £2 terminator
	Color signal
VIDEO	signal	1.0V p-p, 75	£2terminator
	Input	200mV rms,	20k £2or less (max. 3.0V p-p)
Audio	signal
	Output	0-200mVrms,	1k

2. Signal	input jacks
			Color	signal		Brightness signal
			Ground			Ground
				S-VIDEO input (mini DIN 4-pin)
_Caution_	The	priority	sequence	of the	video input	jacks is as follows.
	(1)	S-VIDEO	input jack		(2) RCA	jack input jack
	When video signals are being projected, the audio input by the video is output to the audio
	output jack		(RGB/V1DEO).

Connection to the RGB signal terminal

1. Input signals

Video signal

Horizontal sync signal

Vertical sync signal

Compound sync signal

Input

Audio signal

Output

2. Signal input jacks

1Video input (red)

2Video input (green)

3Video input (blue)

4N.C

5N.C

6Ground (red)

7Ground (green)

8Ground (blue)

Analog, 0.7V p-p, 75 £2terminator (positive polarity) TTL level (positive/negative polarity)

TTL level (positive/negative polarity)

TTL level

200mV rms, 20k £2or less (max. 3.0V p-p)

O~200mVrms, 1k £2

9N.C

10 Ground

11 N.C

12 DDC jack (Display Data Channel)

13 Horizontal sync signal/compound sync signal

14 Vertical sync signal

15 DDC jack (Display Data Channel)

51

,0(OoOoOo&

1511

D-sub 15-pin shrink jack

22