Hitachi DV-PF2U instruction manual Settings, Changing the Audio Language or Sound Mode

¡Press the K Button to go back to the upper hierar- chy.

¡If the entire program cannot be displayed at once on the screen, “L” appears to go to the next page.

3When the disc has been programmed, press the PLAY Button.

¡Programmed play starts.

Notes

¡Press the CLEAR/C. RESET Button, and the last- programmed entry will be deleted.

¡Press the RETURN Button, and the STOP screen will show up with the program contents in memory.

¡The program setting will be cancelled when the power is turned off or the disc tray is opened.

¡Program will be cleared when you turn the power off.

TO CLEAR THE PROGRAM

¡Press the STOP Button twice, and the program will be cleared.

English

SETTINGS

CHANGING THE AUDIO

LANGUAGE OR SOUND MODE

DVD CD

The DVD/VCR has a function which allows you to select the desired audio language and sound mode.

For DVDs

Press the AUDIO Button during playback, and then press the AUDIO Button to select the desired audio language.

¡The audio language can be changed if multiple languages are recorded on the DVD being played.

AUDIO 1.ENG DolbyD 5.1CH

AUDIO 2.FRE DolbyD 5.1CH

AUDIO 3.JPN DolbyD 5.1CH

HELLO Bon jour

Note

¡For some Audio language, three dashes (---) may appear instead of a three-letter abbreviation for the language (ENG, FRE, etc.).

For audio CDs

Press the AUDIO Button during playback.

¡Pressing the AUDIO Button cycles the sound mode through STEREO, L-CH and R-CH.

AUDIO STEREO

Both right and left channels are active (stereo).

AUDIO L-CH

Only the left channel is active.

AUDIO R-CH

Only the right channel is active.

Notes

¡Pressing the Audio Button may not work on some DVDs with multiple audio languages (e.g. DVDs which allow audio language setting on the disc menu). Operation varies between discs, so refer to the manual accompanying the disc.

¡Current audio language and sound mode will be dis- played when you press the AUDIO Button at first.

¡If a desired language is not shown after pressing the Audio Button several times, the disc does not have an audio source in that language.

¡The audio language resets to the one which has been selected in the setup mode, every time the power is turned on or discs are replaced. If that language is not available on a disc, a language defined by the disc is selected.

¡The screen display will disappear after about 5 seconds.

¡If you use DIGITAL AUDIO OUT jack, the sound mode of audio CDs can not be changed.

– 33 – EN

2C15