Hitachi DV-PF2U Programming the Remote Control of the TV, Controlling the TV

REMOTE CONTROL OF THE TV

PROGRAMMING THE REMOTE CONTROL OF THE TV

1Turn off the TV.

2Program the remote control

Aim the DVD’s remote control at your TV set. Hold down the TV POWER/STANDBY Button while you press the number corresponding to your brand of tele- vision as shown in the chart.

For example; If you have a Hitachi television, press the TV POWER and 1 at the same time. If this Button combination sends a signal that matches with your TV, the TV will turn on, and you’ll know the remote is set to control the television.

NOTES:

¡If that Button combination does not change the TV channel, go through the whole list of Button com- binations one by one until you find one that does change your TV channel.

¡Also, if your brand of TV is not listed in the chart, try all the number Buttons. One of them may work for you.

¡If the TV channel still doesn’t change after going

through all the Button combinations listed, it is likely that you will not be able to program this remote control for your TV.

¡With some TVs, the VIDEO/TV Button may not function.

TV Brands	Press the TV and This Number
HITACHI	1
SONY	2
RCA	3
SANYO	4
ZENITH	5
PANASONIC1	6
PANASONIC2	7
SHARP1	8
SHARP2	9
TOSHIBA	0
JVC	CLEAR
MITUBISHI	+10
MAGNAVOX	SUBTITLE
FUNAI	AUDIO
GOLDSTAR	DISPLAY

CONTROLLING THE TV

Once programmed, the DVD’s remote control is ready to control the TV.

NOTE: Be aware that not all of your TV’s functions may work even though the remote control is correctly programmed.

To operate the TV

¡You can turn on your TV by pressing the TV POWER/STANDBY Button.

¡You can change the channels with the CH (K) or CH (L) Button and the volumes with VOL ( ) or VOL ( ) Button for the TV.

To operate the DVD

Press the VIDEO/TV Button to operate your DVD with the remote.

English

– 41 – EN

2C15