
English
Recording (Dubbing) Images
Before You Begin
•Before connecting this DVD video camera/recorder to another device, be sure to turn both devices off.
•Insert a recordable disc*1 or card*2 into this DVD video camera/recorder
(see pages 25 and 26).
*1 No photo can be recorded on
*2 Only photos can be recorded: No video can be recorded.
•If you operate the DVD video camera/recorder connected to another device, always power the camera/recorder from AC outlet using the AC adapter/charger.
•If you use a Hitachi VCR, it will be operated by the remote control* provided with the DVD video camera/recorder. When recording an image from a Hitachi VCR, change the remote control code of the VCR
to other than “VCR2”.
* The remote control is not provided with
RECORDING (DUBBING) IMAGES ON OTHER VIDEO DEVICES
You can record (dub) images played back on this DVD video camera/recorder, on other video devices.
Use the AV/S output cable (provided) to connect the DVD video camera/recorder to another video device as shown in the following figure:
Signal flow
To AV output jack | To |
input jack of | |
| VCR, etc.* |
AV/S output cable (provided) |
|
To video/audio input jacks
Red
White
Yellow
*If the video device to be connected has an
1
2
3 Set the channel of the connected video device to an external input.
4Press the playback () button on this DVD video camera/recorder and the record button on connected device: The DVD video camera/recorder will start playback and the recorded device will record (dub) it.
Note:
•Using
•Reduce the volume of external input sound heard from the
•It is recommended that you use Disc Navigation to create a play list including the scenes to be dubbed among the scenes recorded on this DVD video camera/recorder (p. 93).