Hitachi DZ-GX5020E, DZ-GX5040E, DZ-GX5100E Go To, Disc or Card Management, Top End

Press the DISC NAVIGATION button. Press the MENU button.

English

 

Go To

From the Disc Navigation screen, you can jump to the first scene or last scene, and playback will start from that point.

TOP (END)

1 Press the DISC NAVIGATION button.	3 Use the 2/1/0///buttons to
2 Press the MENU button.	choose “Top” or “End” on the “Go To” menu
	screen, and then press the button.
	4 Press to start playback.

Disc or Card Management



INITIALISING DISC OR CARD (FORMAT DISC. FORMAT CARD)

Initialising a DVD-RAM/DVD-RW/+RW disc or card will allow you to delete any recorded contents. Before using a DVD-RW/+RW on this video camera/recorder, you must format it.

Before You Begin

•Be sure to use the AC adapter/charger to power the DVD video camera/ recorder for initialisation. If the DVD video camera/recorder is turned off during initialisation and the initialisation is interrupted, incorrect initialisation will result and the incorrectly initialised disc will be unusable.

•If you use a brand-new DVD-RW/+RW disc, message “Disc is not formatted” will appear: Initialise the disc, following the subsequent messages (p. 40).

1

2

3Use the 2/1/0///buttons to choose “Format Disc” or “Format Card” on the “Disc” or “Card” menu screen, and then press the button.

The screen for verifying “Format Disc” or “Format Card” will appear.

4 Choose “YES”, and then press the  button.

When using DVD-RW, a screen for prompting you to choose the VF or VR mode will appear. Choose “NO” to cancel initialisation.

Note:

•If you wish to delete all recorded contents, it is recommended that you use initialisation, which will delete all the scenes in much less time than using the scene delete function.

•Initialisation will delete all the recorded contents on disc or card: Be careful not to delete data by mistake.

•It may not be possible to initialise a disc with many scratches or dirt: Such a disc cannot be used (p. 10).

•This DVD video camera/recorder may not recognise some discs or cards that have been initialised on PC or a device other than this DVD video camera/ recorder.

•If you attempt to initialise a disc or card in this DVD video camera/recorder when it is connected to PC via PC connection cable, the disc or card may not be initialised and may be unusable on this DVD video camera/recorder.

•If you choose the VR mode when initialising a finalised DVD-RW (VR-mode), the finalisation will not be released. (The DVD-RW will be a finalised disc without any recorded data, and recording will be possible on it.)

Choosing the VF mode will release the finalisation of the disc.

100