Hitachi DZ-GX5040E, DZ-GX5020E, DZ-GX5100E instruction manual Conversion lens Step-up ring Attach

English

RECORDING SUBJECTS FOR STRONGER WIDE-ANGLE OR TELEPHOTO EFFECT

Use the tele-conversion lens or wide-conversion lens with the following filter diameter and thread pitch to record subjects for stronger telephoto or wide-angle effect:

Filter diameter: 34 mm for DZ-GX5060E/GX5040E/GX5020E; 30.5 mm for DZ-GX5100E

Thread pitch: 0.5 mm

When attaching the optional DZ-TL1 tele-conversion lens or DZ-WL1 wide-conversion lens, use the optional step-up ring: DZ-SR3437 for DZ-GX5060E/GX5040E/GX5020E, DZ-SR3037 for DZ- GX5100E (see page 130).

1Attach the step-up ring over the lens.

2 Remove the cap of conversion lens, and screw the lens into the thread of step-up ring.

Conversion lens

Step-up ring

(Attach)

•Tele-conversion lens: For stronger telephoto effect

•Wide-conversion lens: For stronger wide-angle effect

Note:

•With DZ-TL1 tele-conversion lens, the focusing range at “T” (telephoto) control side is between approx. 5 m and infinite.

•When a conversion lens is attached, note that the four corners of screen will be slightly dim if you zoom in on a subject on the W control side (wide-angle side).

•When replacing the lens, take care not to drop the DVD video camera/recorder.

•If a generally available filter is attached, do not attach the removed lens hood.

•Some generally available conversion lenses may not be usable on this DVD video camera/recorder, depending on the lens maker.

54