English
RECORDING DARK SUBJECTS USING LCD MONITOR LIGHT
When Programme AE is set to Low Light, you can use the light from LCD monitor to record a subject.
1 Press the MENU button, and choose “Program AE” from the “Camera Functions Setup” menu.
2 Choose “Low Light”, and designate it.
3 Press the MENU button to end the setting.
4 Open the LCD monitor, turn it 180º so that it faces the same direction as the lens: The LCD monitor will light white.
Note:
•Use the viewfinder to check the image to be recorded.
•The LCD monitor light allows you to record a subject up to 1 m even in a dark place.
•An
•If a subject cannot be focused properly, manually adjust the focus (see page 55).
ADJUSTING COLOUR (WHITE BALANCE)
This DVD video camera/recorder automatically adjusts the colour of subject. Change the white balance setting depending on the recording conditions.
Mode | Setting content |
|
|
|
|
Auto | White balance always automatically adjusted | None |
|
|
|
Set | You can manually adjust white balance to match the light | ; |
| source or situation (p. 61) | |
|
| |
|
|
|
Outdoor | To record in fine weather | < |
|
|
|
Indoor | To record under incandescent light, halogen light or bulb- | = |
| colour type fluorescent light | |
|
| |
|
|
|
60
