REMOVING BATTERY FROM REMOTE CONTROL
1 While pushing the battery holder, slide the battery out.
English
Warning:
•KEEP THE BATTERY AWAY FROM CHILDREN AND PETS.
•IF SWALLOWED, CONSULT A PHYSICIAN IMMEDIATELY FOR EMERGENCY TREATMENT.
•BATTERY MAY EXPLODE IF NOT HANDLED PROPERLY. DO NOT RECHARGE, DISASSEMBLE OR DISPOSE OF IN FIRE.
Note:
•Replace the battery with a Hitachi Maxell, Sony, Panasonic, Sanyo, Toshiba CR2032, or Duracell DL2032. Use of another battery may present a risk of fire or explosion.
•Dispose of battery safely in accordance with local laws. Do not dispose of in fire.
•Do not short circuit the battery.
•Do not hold the battery with the metallic tweezers.
•Keep the battery in a dark, cool, dry place.
●Using remote Control
Point the remote control to the infrared receiver on the DVD video camera/recorder. The remote controllable distance is up to 5 m.
Note:
•When using the remote control, make sure that the infrared receiver on DVD video camera/recorder is not exposed to direct sunlight or any intense light. If the infrared receiver is subject to light stronger than the infrared light from remote control, the DVD video camera/recorder cannot be operated by remote control.
•If there is an obstacle between the remote control and infrared receiver on DVD video camera/recorder, remote control may not be possible.
•The DVD video camera/recorder uses the “VCR2” remote control code of Hitachi VCRs. If you use a Hitachi VCR, etc. with remote control code set to “VCR2”, a VCR placed near the DVD video camera/ recorder will also be operated by the remote control: To prevent this, change the remote control code of the VCR.
23
