Hitachi DZ-HS500A instruction manual 151

	Symptom		Cause and Correction	Reference	English
				page
Operating sound is		This sound is heard because the disc is cyclically operated and
heard cyclically.		does not indicate a fault.		—
Some vibrations are felt		These vibrations or sound are caused by HDD/disc drive: This
or slight sound is heard		does not indicate a fault.		—
from mechanism.
•	No operation can be	In the following cases, it will take more time than usual until
	performed because	operation is possible:
	the ACCESS/PC or	•	Immediately after a disc or card is reinserted.
	CARD ACCESS	•	When a long time has elapsed since the DVD video camera/
	indicator on this DVD		recorder was turned off last.
	video camera/	•	When the temperature is greatly different from the status of	8, 38
	recorder remains lit or		previous recording.
	blinking.	• When disc with scratches, dirt or fingerprints is inserted.
•	After disc or card is	• When disc is subject to severe vibrations.
	inserted, it takes	•	When the battery or DC power cord was disconnected instead
	some time until		of following the correct procedure using power switch to turn
	recording is possible.		the DVD video camera/recorder off.
No image in viewfinder.		•	Is LCD monitor open?
			No image will appear in viewfinder unless the LCD monitor is
			closed and securely locked to DVD video camera/recorder.
		•	Is the DVD video camera/recorder set to the sleep/restart	32, 43
			status?
			Press the SLEEP/RESTART button to release the sleep/restart
			status.
No image appears on		•	Is DVD video camera/recorder connected to PC using PC
the LCD screen or in			connection cable?
the viewfinder.			Unplug the PC connection cable.
		•	Does DVD video camera/recorder stop at the end of the scene
			to which wipe-out was set and played back?	43, 88, 123
			Press the DISC NAVIGATION button.
		•	Is the DVD video camera/recorder set to the sleep/restart
			status?
			Press the SLEEP/RESTART button to release the sleep/restart
			status.

151