Hitachi DZ-HS500A Trouble Messages, 138, Message Cause & Troubleshooting Reference

English

Trouble Messages

A message may appear while you are operating the DVD video camera/recorder. If a message appears, refer to the following table and take appropriate corrective action.

Messages are arranged in alphabetical order.

Message		Cause & Troubleshooting	Reference
			page
(1) Data error in a part	It is possible that the system cannot normally complete writing of
of image file. Repair	file when power is turned off for some reason during recording or
data now?	editing (deleting, dividing or combining scenes, or creating play
(2) Found error in image	list). Selecting “YES” will automatically repair the video file, but
file. Repair data now?	even if “NO” is selected, the same message will appear when the
(3) Data error in all	DVD video camera/recorder is turned on next time. (Do not
image file. Repair all	remove the disc while the DVD video camera/recorder is
data now?	recognizing it: Ignoring this will deactivate the file repair function.)
	Follow the instructions on screen, taking note of the following
	cautions:
	•	Be sure to use the AC adapter/charger to power the DVD video
		camera/recorder when repairing data: Repair is not possible
		using a battery. If a battery has been attached, turn the power
		switch off once, connect the AC adapter/charger, and then start
		repairing.
	•	If message (1) appears when using the HDD, a battery can be	—
		used for repair (if the remaining battery level indicator shows
		more than half level).
	•	Repair will normally be complete in several minutes, but it may
		take longer (up to one hour).
	•	Data may not be repaired, depending on the timing when
		power was turned off.
	•	Data may not be repaired normally if data recorded on another
		recorder is mixed in.
	•	The repaired data may be different from the original recorded
		content because of partial deletion of defective portion.
	•	Since the date/time for repair is added to the repaired data
		(only the corrected portion for partial repair), the original date/
		time information will be lost.
	•	Since all movies, and then all stills, are repaired, the order of
		recorded contents will be lost in case of message (2) (3) only.
	•	See *1 on page 144.
(1) DVD is not	A DVD-RW/+RW that was initialized by PC and not initialized for
formatted. Format the	camera use is inserted.
DVD now?
(2) DVD Format. Select			39
record format.
(Displayed only when
DVD-RW is used.)
All scenes are already	This message will appear if you attempt to execute “New”
dubbed. Please use	dubbing with no un-dubbed scenes on HDD. Turn off the dubbed		81, 84
other Dub Mode.	marks on scene(s) you want to dub, or choose another dubbing
	method.
Auto finalizing...	This message will appear with a +RW when it is removed after
Plaese wait...	recording, or the last recorded scene was deleted. The auto-		114
	finalized +RW can be played back on a DVD recorder/player.
Cannot combine scene.	Unless consecutive scenes are selected, they cannot be		87
	combined.

138