Hitachi DZ-HS500A instruction manual 130

English

8 Click “Write” to create a DVD-Video. Clicking “Write” will display the screen for writing.

Check “Create disc”, perform setting for write, such as choosing DVD write drive, and then set a blank DVD-RW/DVD-R into the drive.

Clicking “Preview” will allow you to check any image of DVD to be created.

Click

Click

Click

Click the “Write” button: The screen for setting write will appear. After checking the settings, click “OK”: Writing will start.

When write is complete, the drive will open to eject the DVD: Creation of an original DVD is now finished.

Note:

•If you load a written DVD-RW in the write drive, the dialog “Are you sure you want to delete the content of disc?” will appear.

Deleting the content of disc will erase all data on the disc: Carefully check the contents of disc.

Choosing “Yes” will display the screen for choosing the disc erasure method: After checking it, click the “OK” button. Once the contents on disc have been deleted, the cover of disc insertion block on DVD video camera/recorder will open. Close the cover following the message instruction.

•If the disc contains a video file that does not conform to DVD-Video format, the video will be re-encoded, resulting in deterioration of image quality.

•If you execute “File” - “Save project”, the halfway operation status can be saved as a project file. Reading in this saved project file will allow you to restart the operation from the saved status.

•A project file will be saved in the project folder that was designated when images were saved, and the file name will be automatically attached.

•If a video recorded on the HDD in this DVD video camera/recorder for extended hours is too long for one disc, cut-edit the video so that it can be recorded on one disc. See the on-line instruction manual of ImageMixer 3 for cut-editing of videos. To display the ImageMixer 3 manual, choose “Help”, and then “ImageMixer 3 Help (H) F1”, while ImageMixer 3 is being executed.

130