Hitachi DZ-HS500A instruction manual 141

Message		Cause & Troubleshooting	Reference	English
			page
DVD error has occurred.	Disc error could have occurred during editing of scenes.
Keep DVD inside &	Turn off the DVD video camera/recorder with the disc being used		26
restart.	in it, connect AC adapter/charger, and then power the DVD video
	camera/recorder again. Repair of scenes will be tried.
DVD error has occurred.	This message will appear if disc error has occurred during
Please keep DVD inside	dubbing. Connect the AC adapter/charger to DVD video camera/		31
and set power switch to	recorder, and set the power switch to “DVD”: Video file will be
“DVD”.	repaired.
DVD error has occurred.	This message will appear when disc error occurred during
Unfinalizing is not	unfinalization, and unfinalizing disc failed. Replace the disc.		109
complete.
DVD error has occurred.	•	Use another disc.	11, 24
	•	See *3 and *4 on page 144.
	•	Mismatch in recording information may be caused by editing
		done on some device other than this DVD video camera/
		recorder.	105
		Initialize the disc or use another disc.
	•	Initializing the disc will erase all data on it.
DVD full. Cannot	This message will appear if the capacity of the scene selected is
execute.	larger than the free space on disc. Select another scene, or use		80
	another DVD.
DVD must be finalized	•	This message will appear if you remove a DVD-RW (VF-mode)/
before it can be played		DVD-R that has not been finalized from the DVD video camera/	114
back on DVD player or		recorder.
DVD recorder.	•	See *5 on page 144.
Drive overheat. Please	The temperature inside the DVD video camera/recorder is too
retry later.	high, and writing to disc or reading from disc may not be
	performed normally.		31
	Turn the DVD video camera/recorder off and wait for a while. The
	temperature will be effectively decreased if the DVD video
	camera/recorder is placed in a well-ventilated spot.
DVD-R* cannot dub the	With a DVD-RW (VF-mode)/DVD-R/+RW, no video can be
scene recorded in STD	recorded with a combination of movie quality “STD” and 16:9
mode and 16:9.	mode “On”. Replace the disc with a DVD-RAM or DVD-RW (VR-		80
	mode) for dubbing.
	* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode),
		“+RW” will appear when using a +RW.
DVD-R*, Different video	With a DVD-RW (VF-mode)/DVD-R, the movie quality mode and
mode, 16:9 and 4:3	16:9 mode cannot be changed in the middle of disc: Change the
mode cannot exist	movie to be dubbed or replace the disc with a DVD-RAM or DVD-		63
together.	RW (VR-mode).
	* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode).
DVD-R*, 16:9 mode	With DVD-RW (VF-mode)/DVD-R/+RW, the setting of 16:9 mode
cannot be changed,	will not be possible when the Video mode is STD.		63
when Video mode is	* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode),
STD.		“+RW” will appear when using a +RW.
DVD-R*, Input Source	Once a DVD-RW (VF-mode)/DVD-R has been recorded in the
cannot be changed.	16:9 mode, the input source will not be changeable.		63
	* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode).
DVD-R*, Video mode	With DVD-RW (VF-mode)/DVD-R, the movie quality mode and
and 16:9 mode cannot	16:9 mode once used for recording cannot be changed.		63
be changed.	* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode).

141