Hitachi DZ-HS500A Inserting and Removing Disc, Push the shaded portion Pickup lens

English

	1<>2/
Inserting and Removing Disc
1 Set the power switch to “DVD” or “OFF” .	When removing the disc:
	While pushing down the center portion of
When the power switch is set to “HDD” or	turntable, pick up the disc, holding its edge,
“SD”, the cover of disc insertion block will	to remove it.
not open. When “Please insert DVD.” appears
during dubbing, however, the cover of disc
insertion block will open even when the
power switch is set to “HDD” (see p. 80).
2 Press down the DISC EJECT button once and	Turntable
release it.

A few moments after the ACCESS/PC indicator blinks, the cover of disc insertion block will open.

3 Gently open the cover by hand fully until it stops.

4 When inserting a disc:

Push the disc against the turntable at the center to lock it until a click is heard.

Push the shaded portion.

Pickup lens

•Note that the recording surface of disc must face the inside of DVD video camera/recorder. When using a single-sided disc, the recording surface is the side without label.

•Never touch the disc recording surface or pickup lens. Touching the pickup lens could cause a fault.

•Use the disc cleaning cloth provided to wipe off any dirt adhering to the disc recording surface.

•Do not use a dirtied or scratched disc.

5 Push the section marked “PUSH CLOSE” on the cover of disc insertion block, to close the cover.

Then the DVD video camera/recorder will automatically recognize the disc: While the ACCESS/PC indicator is lit, do not cut off the power supply, and do not subject the DVD video camera/recorder to any vibrations or impact.

38