Hitachi DZ-HS500A Resetting Menu Settings to Defaults Reset, Changing Setting of Demonstration

RESETTING MENU SETTINGS TO DEFAULTS (RESET)

You can restore menu settings to defaults (initial settings at the factory (p. 152)). (Note, however, that the date/time will not be reset.)

1 Choose “Reset” on the	I n i t i a l S e t u p		Off	2 If you are sure that you	Re s e t
“Initial Setup” menu	Po w e r S a v e			wish to reset, use the
	Be e p		On
screen, and then press	R e c o r d LED		On	dbutton to choose		Re s e t ?
	L a n g u a g e		English
the Abutton.	Demo Mode		Auto	“YES”, and then press	YES	NO
	Reset
	ENTER	RETURN		the Abutton.	ENTER
The screen for verifying reset will appear.
				The setting items have now been reset to
				defaults.
				Note:
				To cancel resetting midway, choose “NO” on the screen
				for verification in step 2 or press the Cbutton.

TURNING RECORD LED ON OR OFF (RECORD LED)

You can switch off the recording indicator on the front of DVD video camera/recorder even during recording.

English

Select “On” or “Off”, and
then press the Abutton.	I n i t i a l S e t u p
	Be e p	OnOn
	Po w e r S a v e	Of f
On: The recording	R e c o r d LED
	L a n g u a g e
indicator will light	Demo Mode
	Reset
	ENTER RETURN
red to show that the
DVD video camera/recorder is recording.

Off: The recording indicator will not light even during recording.

Note:

•The Record LED setting will not appear in the on- screen information display.

•The Record LED setting will be stored in memory even when the DVD video camera/recorder is turned off.

•Specify “Record LED: Off” when recording a subject

behind a glass or water tank that reflects light: The reflected light of the recording indicator will not be recorded.

•Even if “Record LED: Off” is specified, the recording indicator will light while the self-timer is counting down.

CHANGING SETTING OF DEMONSTRATION

Choose the desired option	I n i t i a l S e t u p
using the screen on the			O f f
	Power Save
	Beep		A u t o
right, and then press the	Re c o r d LED		S t a r t
	L a n g u a g e
Abutton.	Demo Mode
	ENTER	RETURN
	R e s e t

Auto: To start demonstration if the DVD video camera/recorder connected to AC adapter/charger is inactive for approx. 10 minutes or more after it is turned on.

Off: To set demonstration to off.

Start: To start demonstration immediately.

Note:

•If “Auto” is specified, the demonstration will not start if a battery is connected.

•Pressing the C(STOP/EXIT) or DISC NAVIGATION button will exit demonstration.

•If “Auto” is specified, the demonstration will not start when the power switch on this DVD video camera/ recorder is set to “DVD” and a DVD is loaded, or when the power switch is set to “SD” and a card is loaded.

•The demonstration function will not work when the DVD video camera/recorder is connected to PC.

•While the demonstration is being given, the recording indicator will blink.

35