Hitachi DZ-HS500A instruction manual 149

Symptom	Cause and Correction	Reference	English
		page
Error occurs in playback	If error occurs with USB connection, the transfer rate is not
of DVD video camera/	sufficient. It is recommended that you use a USB terminal	119
recorder on PC.	conforming to USB2.0 when connecting the DVD video camera/
	recorder.
Application is not	Turn the PC and DVD video camera/recorder off, and try again.	—
normally run on PC.
Error occurs during	The temperature of DVD video camera/recorder is too high due
writing to disc.	to continuous operation.
	Disconnect the DVD video camera/recorder from PC once,	—
	remove the disc from the DVD video camera/recorder, and then
	turn it off. After a few moments, connect them again and write to
	a brand-new disc.
Transfer of images	Connect the DVD video camera/recorder to another USB terminal
stops.	of PC. If your PC is a desktop type, it is recommended that you
	use USB terminal on the back of PC. If you are using USB2.0	—
	extended card, it is also recommended that you install the newest
	version driver provided by each USB2.0 card maker.
	Is disc scratched or does dirt or fingerprint adhere to it?	11
	Clean the disc.
DVD drive built into PC	This problem may be solved if you update the DVD editing/
cannot be used after the	creating software of your PC.	—
provided software has
been installed.
Error appears when	Make sure that your PC display adapter (video card) conforms to	119
starting ImageMixer 3.	DirectX®9.0c.
Movies are not	Make sure the power switch of this DVD video camera/recorder is
recognized by	set to “HDD” or “DVD”.	31
application in PC.
The DISC EJECT	While the DVD video camera/recorder is connected to PC, use
button is not valid when	Explorer to right-click the DVD video camera/recorder drive icon
the DVD video camera/	and execute “Eject”.	124
recorder is connected to
PC.
No sound is heard when	Since an MPEG file imported into Macintosh using ImageMixer 3
an MPEG file imported	Mac Edition for DVDCAM uses the audio format of AC3 audio, no
into Macintosh is played	audio will be played back even if the Quick Time MPEG-2
back on Quick Time	playback component is introduced: Only video will be played	135
with an MPEG 2	back. Use ImageMixer 3 Mac Edition for DVDCAM for playback.
playback component
adopted.
When the time stamp of	The file system of this DVD video camera/recorder is operated on
file in DVD-RAM is	Greenwich Mean Time (GMT), and time lag information has not
viewed on PC, it is	been set. With Windows® as of January, 2007, the time stamp of	—
different from the actual	file viewed on Explorer looks different from the actual recording
recording time.	time. The actual recording time will appear for date/time
	indication on playback screen.
It will take some time to	If you are editing a video file whose contents are different from
save a video edited on	those of project setting, it may take some time, since the entire	—
the video editor of	video file must be re-encoded. Reconfirm the project setting.
ImageMixer 3.

149