Hitachi DZ-MV750E, DZ-MV730E, DZ-MV780E, DZ-GX20E instruction manual 169, Miscellaneous

Miscellaneous

			English
Symptom	Cause and Correction	Reference
		page
Power does not come	Execute system reset (press the RESET button).	170
on, or no operation
	Has the DVD video camera/recorder been subjected to impact?
occurs by pressing		
	The DVD video camera/recorder could be damaged. Consult your
button.
	dealer.
The date and time are	Has the DVD video camera/recorder been left unused for a long
incorrect.	period of time?	40
	The internal backup memory battery may be discharged:
	Charge it.
No scene can be	Is the cursor placed on the scene to be deleted?
deleted.	If the selected scene (framed in red) exists, that scene will be	101
	deleted even if you use yellow cursor to select any scene. Check
	the colours of cursors and bar graph on the thumbnail screen.
Disc cannot be	Did you detach the battery or AC adapter/charger before setting
removed.	the power switch to “OFF”?
(Cover will not open.)	Is the battery charged?
	Connect a charged battery or the AC adapter/charger, and then
	press the DISC EJECT button to remove the disc.	46, 47
	Did the DVD video camera/recorder turn off because the battery
	remaining level ran out?
	Connect a charged battery or the AC adapter/charger, set the
	power switch to “OFF”, and then press the DISC EJECT button to
	remove the disc.
DVD video camera/	Is the remote control pointed at the infrared receiver on DVD
recorder cannot be	video camera/recorder?	37
operated from remote	Point it at the infrared receiver to operate the DVD video camera/
control.	recorder.
	Is the infrared receiver on DVD video camera/recorder exposed
	to direct sunlight or strong fluorescent light, etc.?
	The remote control cannot operate the DVD video camera/	37
	recorder when strong light strikes the infrared receiver. Adjust the
	place or angle of the DVD video camera/recorder.
	Is there battery in the remote control?
	Also check the polarities of battery. The battery could be dead:	36
	Try replacing it.
	Is the DVD video camera/recorder powered?	47
	Turn it on.
Disc cover cannot be	Is disc correctly inserted?
closed.	Was disc inserted from wrong direction?	48
	Remove the disc and then reinsert it.
	Connect a fully charged battery or AC adapter/charger, and then	42, 46
	turn the DVD video camera/recorder on.
Operating sound is	This sound is heard because the disc is cyclically operated and	
heard cyclically.	does not indicate a fault.
Some vibrations are felt	These vibrations or sound are caused by disc drive: This does	
or slight sound is heard	not indicate a fault.
from mechanism.

169