Symptom

Cause and Correction

Reference

 

English

page

 

Even if the DVD video

The DVD video camera/recorder will automatically turn on to

 

 

 

 

 

camera/recorder is off,

recognise a disc: Closing the cover will automatically turn the

 

 

 

opening the cover will

DVD video camera/recorder off.

49

 

 

cause the ACCESS

 

 

 

 

indicator to blink.

 

 

 

 

 

 

 

 

 

During recording

Symptom

Cause and Correction

Reference

page

 

 

Pressing the REC or

Is the disc write-protected or the card locked?

 

PHOTO button will not

 

30, 130, 155

start recording.

 

 

 

 

 

Recording starts but

Is disc scratched or does dirt or fingerprint adhere to it?

54

stops immediately.

Clean the disc. If there is still no improvement, replace the disc.

 

 

 

 

LCD screen is hard to

Has brightness of LCD screen been adjusted?

95

see.

Stop recording and adjust the brightness.

 

 

 

 

 

Is the DVD video camera/recorder being used outdoors?

 

 

Use the viewfinder. When using LCD monitor, adjust its angle so

38, 39

 

that LCD screen is not exposed to direct sunlight.

 

 

 

 

Focus is not correct.

Is it difficult to use auto focus with your subject?

75

 

Focus manually.

 

 

 

 

 

 

Does “MF” appear?

 

 

The DVD video camera/recorder is set to manual focus. Focus

74

 

the subject manually, or release manual focus.

 

 

 

 

 

Is the dioptre control correctly adjusted if you are using the

 

 

viewfinder as a monitor?

39

 

Adjust the dioptre control.

 

 

 

 

 

In cases other than the above, set the power switch to “OFF”, and

47

 

then set it to “O”, “N” or “P” again.

 

 

 

 

 

An error message for

Repair is only possible when the DVD video camera/recorder is

 

repair appears.

powered by the AC adapter/charger. Remove the disc, and then

46

 

insert another disc: The removed disc can later be repaired by

 

 

 

connecting the AC adapter/charger.

 

 

 

 

Unevenness appears on

Did you press the LCD monitor or the area around it?

 

LCD monitor screen.

If the LCD monitor is pressed, some unevenness will occur.

 

Release your hand and leave the LCD monitor for a while:

 

 

 

Normal display will be restored.

 

 

 

 

165

Page 165
Image 165
Hitachi DZ-MV750E, DZ-MV730E, DZ-MV780E, DZ-GX20E instruction manual 165, During recording