Hitachi DZ-MV750E, DZ-MV730E, DZ-MV780E, DZ-GX20E instruction manual 109, Dividing Movies Edit Divide

1

DIVIDING MOVIES (EDIT – DIVIDE)

You can divide a scene into two parts.

To delete unnecessary portion of scene, first divide the scene, and then delete the unnecessary portion.

English

1 Press the DISC NAVIGATION button.
2 Select the scene to be divided.
3 Press the MENU button.
4 Choose, “Scene”,	Sc ene
“Edit”, “Divide” and
		Ed i t	De v i de
then press the A		E f f ec t	De l e t e
		Copy	Comb i n e
button.		Se l e c t
		De t a i l

5 The “Divide Scene”	ETC
	ENTER RETURN	RAM
screen will appear: If
you are sure you want to divide the selected
scene, press the Abutton: The selected
scene will be played back.

If you want to change the scene to be divided, you can change it on this screen.

Note:

•	If you press the MENU button before pressing the
	Abutton in step 5, the submenu will appear (see
	page 108).
•	Search and frame advance are useful when
	designating division points.
•	Combining scenes that were divided will restore the
	original scene (see page 110).
•	If a special effect has been added to the original
	scene, the “IN” effect will be added to the first half of
	scene, and the “OUT” effect, to the latter half.
•	The division point may drift before or after the
	designated point by approximately 0.5 seconds.
•	Since a scene with a skip set cannot be played back,
	no division point can be specified: Release the skip
	for the scene before dividing it.
•	If the division point is at a still, a message will appear,
	but no division will be made.
•	If the division point is at the start or end of a scene, a
	message will appear, but no division will be made.
•	A movie scene whose recording time is 0.5 seconds
	or less cannot be divided.

6 When you reach the point where you want to divide the scene, press the SELECT button.

Se l ect D i v i s i o n Po i n t
	002 RAM 0 : 00 : 18
SEL ENTER	CANCEL

• If free space available on disc is insufficient, division

will not be possible: Delete unnecessary scenes.

The status bar of scene being played back can be switched off or on by pressing the DISPLAY button.

7 The screen for verifying	D i v i de Scene
division will appear:
Choose “YES”, and then	D i v i de s cene?
press the Abutton.
	YES NO
Choose “NO” to cancel	ENTER

division.

After division, the “Divide Scene” screen will be restored.

Repeat steps 5 – 7 to divide another scene.

8 Press the Cbutton to quit.

109