Hitachi DZ-MV730E Inserting Battery Into Remote Control, Removing Battery from Remote Control

English

INSERTING BATTERY INTO REMOTE CONTROL

Insert the provided lithium battery into remote control.

1 While inserting a fine rod into the hole marked PUSH, pull the battery holder out forward.

2 Insert the lithium battery with the positive R terminal facing down.

3 Slide the cover to close it.

Note:

The life of lithium battery is approximately one year. If the battery is discharged, no operation is possible with remote control: Replace the battery.

Battery holder

REMOVING BATTERY FROM REMOTE CONTROL

1 While pushing the battery holder, slide the battery out.

Warning:

•KEEP THE BATTERY AWAY FROM CHILDREN AND PETS.

•IF SWALLOWED CONSULT A PHYSICIAN IMMEDIATELY FOR EMERGENCY TREATMENT.

•BATTERY MAY EXPLODE IF NOT HANDLED PROPERLY. DO NOT RECHARGE, DISASSEMBLE OR DISPOSE OF IN FIRE.

Note:

•Replace the battery with a Hitachi Maxell, Sony, Panasonic, Sanyo, Toshiba CR2032, or Duracell DL2032. Use of another battery may present a risk of fire or explosion.

•Dispose of battery safely in accordance with local laws. Do not dispose of in fire.

•Do not short circuit the battery.

•Do not hold the battery with the metallic tweezers.

•Keep the battery in a dark, cool, dry place.

•The remote control (DZ-RM4W) and lithium battery (CR2032) are supplied only with the DZ-GX20E, DZ- MV780E and DZ-MV750E.

36