Hitachi DZ-MV750E, DZ-MV730E Using the Electronic Image Stabiliser EIS, Checking EIS On or Off

USING THE ELECTRONIC IMAGE STABILISER (EIS)

When you use zoom (see page 59) to record a magnified subject image, it will correct fuzziness in the recorded image.

English

1 Press the MENU button, choose “EIS” on the “Camera Functions Setup” menu screen, and then press the A button.

Came r a		F u nc t i on s	Se t u p
	P r o g r am AE
	Wh i t e Ba l .
	E I S			On
	D i g . Zoom			Of f
	M IC . F i l t e r
ENTER		RETURN			RAM

After recording with EIS set to “Off”, it is recommended that you return the setting to “On” and then turn the DVD video camera/ recorder off, unless you normally record with “Off” setting.

2 Choose the “On” or “Off”, and then press the

Abutton.

3 Press the MENU button to end the setting.

●Checking EIS On or Off

You can check EIS On or Off by the on-screen information display.

			0 : 0 0	: 0 0
EIS			REM3 0 MIN
	FINE	8		: 0 0
		3 0 / 9 / 2 0 0 5

Note:

•The EIS setting will be stored in memory even when the DVD video camera/recorder is turned off.

•It is recommended that you specify “EIS Off” when using the DVD video camera/recorder on a desk or tripod.

•When “EIS On” is specified, there will be a slight difference between the actual movement and the movement on screen.

•Gross camera shake may not be entirely corrected even if “EIS On” is specified: Firmly hold the DVD video camera/recorder with both hands.

•EIS may not operate correctly when the tele or wide- conversion lens is used.

•EIS cannot be used when recording photos on DZ- GX20E or DZ-MV780E.

RECORDING SUBJECT USING LARGE MAGNIFICATION (DIGITAL ZOOM)

See page 59 for setting on digital zoom.

REDUCING WIND NOISE DURING RECORDING (MIC.FILTER)

When recording sound from the microphone built into this DVD video camera/recorder, you can reduce wind noise in recording.

If “MIC.Filter: ON” is specified, the low-frequency components in the sound picked up by

microphone will be cut off during recording: This makes it easier to hear the target voice or sound during playback.

1 Press the MENU button, choose “MIC.Filter” on the “Camera Functions Setup” menu screen, and then press the A button.

Camer a	Func t i ons	S e t u p
P r og r am AE
Wh i t e Ba l .
E I S
D i g . Zoom
M IC . F i l t e r		On
		O f f
ENTER	RETURN	RAM

3 Press the MENU button

to end the setting. 0 : 0 0 : 0 0

REM3 0 MIN

FINE	8 : 0 0
	3 0 / 9 / 2 0 0 5

Note:

• You can also use the on-	Microphone filter icon
screen display to confirm

2 Choose the desired option, and then press the

Abutton.

that the MIC.Filter has been

set.

•The MIC.Filter setting will be stored in memory even when the DVD video camera/recorder is turned off.

•The MIC.Filter function will work only during movie recording.

•The microphone filter function works only with the built-in microphone: It will not function when using an external microphone (p. 77).

89