Hitachi DZ-GX20E, DZ-MV730E, DZ-MV750E Closing LCD Monitor, Viewing Subject Through Viewfinder

CLOSING LCD MONITOR

Before closing the LCD monitor, be sure to reset it at right angles to the DVD video camera/ recorder.

Replace the LCD monitor on the DVD video camera/recorder with the LCD screen facing inward until a click is heard.

Note:

•Be sure to return the LCD monitor at right angles to the DVD video camera/recorder before closing it or replacing it on the DVD video camera/recorder with its screen facing outside. If the LCD monitor is tilted, it cannot be closed to the DVD video camera/recorder.

•If the LCD monitor is not securely locked to the DVD video camera/recorder, no image will appear in the viewfinder.

English

VIEWING SUBJECT THROUGH VIEWFINDER

1 Pull out the viewfinder.

2 Turn the dioptre control knob to adjust the focus to suit your eyesight.

Note:

•If no image appears in viewfinder, refer to “Check 6” on page 156.

•If the LCD monitor is opened approximately 90º, the viewfinder will be off: Turn the open LCD monitor 180º so that it faces the same direction as the lens; the image will appear in the viewfinder.

•Focusing will not be correct unless the viewfinder is pulled out.

•See “LCD/EVF Setup” (on page 95) if you wish to display images in the viewfinder regardless of whether you open or close the LCD monitor.

Dioptre control

Viewfinder

Pull out the viewfinder until a click is heard.

39