RAM/ROM Slot

To put additional RAM board

1 Backup all data in your Handheld PC to desktop PC.

2 Remove AC Adaptor and main battery.

3 Push the Backup off Switch(refer "to perform a full reset" )

4 Wait over 30 seconds.

5 Put off screw and open the RAM/ROM Cover.

6 Put the additional RAM board on RAM connector.

7 Put on the RAM/ROM Cover and screw.

8 Set main battery and AC Adaptor.

9 Push the reset button.

10 After finishing Welcome wizard, restore your data from desktop PC.

Screw

RAM/ROM Cover

RAM Connector

Caution

Backup all data in your Handheld PC to desktop PC before you perform to add RAM board, otherwise all data in your Handheld PC will be erased.

21

Page 22
Image 22
Hitachi HPW-200EC manual RAM/ROM Slot