Even though the LCD display is off while you are making a PowerPint 97 presentation through the VGA cable, the touch panel remains active. Since you can't see where to tap the touch panel, we suggest using the following keys to manipulate your presentation.
Press | Function |
Advance to the next slide | |
Return to the previous slide | |
<number> + Enter | Go to slide <number> |
ESC | End a slide show |
E | Erase |
8.If you want to return to the LCD from CRT, simply press the ESC key. This will block the monitor output, resume the LCD display, and then make Pocket PowerPoint exit from the slide show.
9.You can repeat these functions whenever you want.
Caution
Supported CRT monitor is 72Hz horizontal Period of VESA Standard.
Note :
Here are a few tips for using the VGA output of your Handheld PC.
1.When presentation ends in External VGA and Manually Mode, the keyboard control of the presentation will not work due to the end of View Show command. The same is true when the presentation ends in External VGA and
25
