Hitachi SJ100 manual 76

3–4

Using Keypad Devices

Keypad Navigational Map

You can use the inverter’s front panel keypad to navigate to any parameter or function. The diagram below shows the basic navigational map to access these items.

Configuring Drive Parameters

Monitor Mode

PRG LED=OFF Display Data

0 0 0.0 powerdown

1 FUNC. Select

d0 9 or Group

1 2

d0 1

12 Function

h - -

1 2

C - - FUNC.

1 2

b - -

1 2

A - -

1		2
F	0 4
1	2
F	0 1		FUNC.

Program Mode

PRG LED=ON

Select Parameter Edit Parameter

1				Store as
				powerup
h	3 4			default
1	2
				Increment/
	0 1
h				value
				decrement
1		2
C	9 1			1	2
1	2
				Edit
C	0 1
			FUNC.	1 2 3.4		FUNC.
		2
1
b	9 2
1	2				STR

b0 1

1		2		Write
A	9 8			EEPROM
				data to
1	2
A	0 1		Return to
			parameter
2			list

2

NOTE: The inverter 7-segment display shows lower case “b” and “d,” meaning the same as the upper case letters “B” and “D” used in this manual (for uniformity “A to F”).

NOTE: The Store Key saves the edited parameter (shown in the display) to the inverter’s EEPROM. Upload or download of parameters to/from external devices is accomplished through a different command—do not confuse Store with Download or Upload.