Advanced | Techniques |
Hitachi | REVERSE |
Sony | PROGRAM |
Panasonic | FORWARD |
Toshiba | IN |
Mitsubishi | COPY START |
Sanyo | OUT |
Sharp |
|
NEC |
|
JVC |
|
Akai | A/V DUB |
Gold Star | i |
| |
PHILIPS | U |
RCA | DISPLAY |
Zenith | COUNTER RESET |
Magnavox | TITLE ON/OFF |
Note: The remote control code is held in memory until it is changed orthe batteries are replaced.
Note: Point the remote control straight at the VCR'sinfrared receiver for operation
Note: Use the remote control indoors. When the infrared receivers of the VCR and camcorder are exposed to
direct sunlight or strong artificial light, the remote control may not operate correctly.
Note: The remote control cannot be operated if there is an obstacle between the remote control and infrared receiver. Especially, be careful of this during dubbing.
Note: When the edit remote control is connected to the camcorder, the buttons marked * in the figure above )erform the same operations as those of the other remote control provided.
Operation
You can select up to four different scenes or segments to be copied at one time.
55
