will automatically disappear.
5 Press the STOP button when you have finished.
Note: Decrease the sound volume of the camcorder whenyou play backa recording by Connecting the
camcorder to your TV, If the v01umeof thecamcorder is set to maximum; the played back picture maybe
distorted. Make sure that thevolume is not setto maximum during recording as itcould distort the played back
picture: i i.
Note: when the LCD monitor is turned on and left as itis, the monitor becomes warm, but this does notindicate a
Note: When the CAM/OFF/VIDEO switch is setto CAM or VIDEO, the LCD monitor is turned onand off
automatical!y when the LCD monitor is opened and closed,
Note: It is recommended that you close the LCD monitor to save the battery power when playing back a picture
on a TV without viewing it.
Note: On!ythe playback sound is heard_ The sound being recorded isnot heard,
Note: No sound is heard when the LCD monitor is closed.
To Play Back a Tape with the Viewfinder
Close the LCD monitor, then press the PLAY button toplay back the tape. The pictureappears in the viewfinder.
INote: You cannot hear the playback sound Whenplaying back yourVideo with the viev_inder. 1
Using Still
To view a still picture during playback press the Start/Stop. Press the Start/Stop button again to resume playback.
If youleave the camcorder in play/pause mode for more than 5 minutes the camcorder automatically stops the
cassette toprevent damage to the tape. You canview a still picture with less noise on the LCD monitor (Clear
still).
Note: The still picture will have several noise bars in the viewfinder and on the TV. Out this does not Indicate a
fault.
Note: Ifyou are freezing apicture with the LCDmonitor closed, then you will notbe able to view a still picture with
34