....... t ¸ i_'_'_'_

¸

"SEPIA": Sepia Mode

The entire picture wilt be sepia.

Note: To switch the mode of return to the normal picture during tape dubbingl temporarily stop the dubbing and 1 press the EFFECTS button.

Note: When tape stops, the normal picture will be restored.

Multi Playback

This camcorder can convert on NTSC recorded tape into "PALdO" format signal. "PALdO"is a special output signal format with which a PAL TV can be used to view a tape recorded on on NTSC recorder.

Connecting to a PAL Television

1 Connect the camcorder to TV as shown in the figure.

2 Turn the TV on and select the TV "video input". Set the TV to the PALd0 mode.

3 Set the CAM/OFF!VIDEO switch of the camcorder to VIDEO.

4 Press the PALd0 button.

5 Press the PLAY button of the camcorder. If you press the DATE/DISP. button at this time, "PALd0" will appear in the viewfinder or on the LCD monitor.

6 When playback is finished, set the CAM/OFF/VIDEO switch to OFF position.

Note: connect the Camc0rder to a TV monitor

which

has a Vertical sync adjustment Circuitry(v0tume) for60

Hz

 

and which can also be loCked !nto the PALd0

mode.

Refer to the TV instructi0n manual for details On h0wto

set

 

the TV:

 

 

 

"

Note: This Camc0rder Cannot record using the PALd0 systeml

 

 

Note: A black-and-white picture will appear on the LCD monitor when playing back tape with the PALd0 system.

I

39

Page 39
Image 39
Hitachi VM H 655 LA instruction manual Multi Playback, Sepia Sepia Mode