Operations).
The recording will continue as set on the VCR. If apreset timed recording starts
up while you are watching the TV, you'll hear the cassette as it clicks on and see
the recording indicator light up on the VCR display.
You can check on the recording by pressing VCR/-IV again. This will switch you
back to viewing through the VCR, you'll see the program you are recording.
To Skip Commercials
When acommercial comes on that you don't want to record, simply press
PAUSE on the remote control. The VCR will stop recording. Press PAUSE again
to continue recording when you see the commercial is over. If you stay in PAUSE
mode for more than 5 minutes, the VCR automatically switches to STOP mode to
protect the tape.
To Change the Channel Being Recorded
Suppose you are recording one program, and you remember that something else
is on that you would rather record. You can change the channel while in the
recording mode.
Press PAUSE to stop the recording temporarily. This is necessary because the
CHANNEL buttons won't work while you are in recording mode--to keep you from
accidentally switching the station while recording.
Change the channel to the one you prefer.
Press PAUSE to continue recording.
To Leave Index Marks on the Tape
This feature is useful when you are recording several programs on the same
tape. It helps you quickly find the beginnings of the shows during playback (page
36).
You create the index "mark" every time you begin recording by pressing REC. To
leave an index mark between shows, simply press STOP at the end of each
show, then press REC to record the next show. (Pressing PAUSE during
recording does not leave an index mark.)
During timed recordings, the VCR automatically inserts an index mark at the
beginning of the recording.
To Record a Second Audio Program (SAP)
Some stations transmit a Second Audio Program - such as in a second
language. If a station broadcasts in SAP, the SA indicator will display on your TV
screen.
You can set the VCR to record a second audio program by activating the SAP
option through the Easy Guide System.
Press GUIDE, then press 2 to bring up the VCR SETUP screen.
Press 6 to set the SAP option to ON.
Make sure that STEREO/MONO selection is set to STEREO.
When this is set, the VCR records the second audio program.
Using the Instant Recording Timer (IRT)
The Instant Recording Timer (RECIIRT button on the VCR) will let you make a
34