If the signal is too strong, this function may not operate even if you specifiy <ON>. During playback this function does not operate.
4 HIFIILINEAR Press 4 to control how the audio signal is processed by the VCR. Options are <HIFI> and <LINEAR>.
5 STEREOIMONO Press 5 to control how the audio signal is recorded and sent to the TV. Options are <STEREO> and <MONO>.
6 SAPPress 6 when you are ready to record a second audio program. Options are <OFF> and <ON>.
Choosing a Mode for Audio Playback
Choose between
HIFI is the preferred setting because it works for all tapes whether they were recorded in
there is no audio, try the LINEAR option.
When you set the option to HIFI,
Stereo vs. Mono Sound
When you select the STEREO option, your VCR records in stereo any station that broadcasts stereo sound. When a TV channel broadcasts in stereo, you'll see a stereo indicator on the TV screen.
STEREO is the normal factory setting because it works for both stereo and mono broadcasts. It is also necessary for recording a second audio program (SAP). When you select MONO, sound is recorded as mono even when a channel broadcasts in stereo.
Use the MONO setting when the stereo signal is not strong enough for quality reception (for example, when there is signal drift or noise).
Hi-Fi Sound
Channel Caption (Station Identifier)
When your VCR is receiving a channel caption signal that is being transmitted by a local broadcasting station together with a TV program, a station identifier is displayed on the TV screen.
24
