1. Press GUIDE, then press 3 to brin } the CLOCK SET screen.
2. Check that item 1 is specified "CLOCK SET <AUTO>".
If "CLOCK SET <MANUAL>" is displayed, press 1 to switch it to "CLOCK SET <AUTO>".
3.Press 2. The following screen appears to show that the clock is being set.
Since the VCR is searching for a broadcast station that transmits a time signal, the channel indication on the cable box changes automatically.
4.The screen shown in Step 3 above changes to a TV picture and the time appears in the VCR'sdisplay.
It may take about five minutes for auto clock setting.
If the clock is not set after about five minutes have elapsed, press GUIDE then set the clock manually (See page 24).
If the displayed time drifts from the current time by more than one hour, select your correct time zone and set the D.S.T. (See page 23).
What to do if the displayed time drifts from the current time by more than one hour
1.Press GUIDE, then press 3 to bring up the CLOCK SET screen. Check that item 1 is specified "CLOCK SET <AUTO>".
2.Press 3 to select your local time zone.
Each time 3 is pressed, the option for "3 SET TIME ZONE" switches from <AUTO> to <ATLANTIC>, <EASTER>, <CENTRAL>, <MOUNTAIN>, <PACIFIC>, <ALASKA>, <HAWAII> and back to <AUTO>.
This screen gives an example where <ATLANTIC> is specified.
3. Press 4 to select the D.S.T. option.
Each time 4 is pressed, the option for "4 SET D.S.T." switches from <AUTO> to <ON>, <OFF> and back to <AUTO>.
<AUTO>: | The | daylight saving | time | (D.S.T.) is set | automatically. |
<ON>: | The | time advanced | from | the Standard | Time by one hour is |
displayed from the first Sunday of April through the last Sunday of October.
<OFF>: | The Standard Time is displayed throughout the year. |
This screen gives an example where <ON> is specified.
4. Press 2 and set the time again.
If the displayed time drifts from the current time by more than one hour even after steps
21
