i
Channel 34 Arts & Entertainment Network
Channel 35 Turner Network Television
Channel 36 ESPN
5.Now you're ready to assign your local channels to VCR Plus+ channels in the VCR's memory. The way you do this depends on how your VCR is hooked up to the incoming RF signal. Decide which hookup you have from the diagrams below, and follow the setup instructions for your type of hookup.
Hint: Try several practice recordings after doing your channel setup. You should get the same channels as you usually watch at home.
Home antenna or Cable (no cable box)
Cable with a cable box
Cable with a cable box and splitter (Cable box to unscramble all channels)
Cable with a cable box and splitter (Cable box to unscramble only pay channels)
Home Antenna
If your VCR is connected directly to your home antenna, chances are you don't have to do any special channel setup. To find out, compare the VCR Plus+ channels in your TV program guide to your list of channels that you receive at home.
If any channel numbers don'tmatch, follow the steps (page 47) to assign your local channel numbers to VCR Plus+ numbers.
Cable (No Cable Box)
This is the channel setup to use if your VCR is hooked up directly to cable without a cable box.
Compare your local TV channel listing to your cable company's channel directory to find channels that need to be assigned to the VCR Plus+ codes. For example:
In the example above none of the cable channels match, all of them need to be assigned to VCR Plus+ channel codes.
Matching Broadcast CH Numbers to VCR Plus+ Channels for Home Antenna or Cable (No Cable Box) Setup
1.Press GUIDE, then press 4 to bring up the CHANNEL PRESET screen.
2.Press 4 to select VCR PLUS SETUP.
You will then see this display, as shown below.
3.A small arrow points to a blank
enter any number. Press CHANNEL up or down to position a nonmatching station next to the arrow.
4. If your broadcast channel number is not the same as the VCR Plus+ channel
40
